User manual ENVISION G2016WA

[. . . ] As an ENERGY STAR Partner our company has determined that this product meets the ENERGY STAR guidelines for energy efficiency. WARNING: To prevent fire or shock hazard, do not expose the monitor to rain or moisture. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. If the monitor falls, it can injure a person and cause serious damage to the appliance. [. . . ] Connecting the DVI Cable (optional) : Connect one end of the 24-pin DVI cable to the DVI signal input socket on the back of the monitor and connect the other end to the computer's DVI port. Connecting the Audio Cable: Plug audio cable between the computer multi-media (or sound) card's audio output and monitor's audio input socket. Figure 2 1. 2 3 4 Power input socket DVI Signal input socket D-Sub Signal input socket Audio input socket Connecting Cables 6 ADJUSTING THE VIEWING ANGLE For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. Hold the stand so you do not topple the monitor when you change the monitor's angle. You are able to adjust the monitor's angle from -5 to 20. Figure 3 NOTES Do not touch the LCD screen when you change the angle. Careful attention is required not to catch your fingers or hands when you change the angle. 7 OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. Connect the cables according to instructions above (section Connecting Cables) Press the power button to turn on the monitor. 7. External Control Button Source Auto Adjust button / Exit < / Volume > /Volume MENU / ENTER Power Button LED 8 FRONT PANEL CONTROL Power Button / Power Indicator: Press this button to turn the monitor ON or OFF. Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD menu when in Volume Adjust OSD status. Activates the volume control when the OSD is OFF or navigate through adjustment icons when OSD is ON or adjust a function when function is activated. Activates the volume control when the OSD is OFF or navigate through adjustment icons when OSD is ON or adjust a function when function is activated. When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu). When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function. The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus. MENU / ENTER : > /Volume: < /Volume: Auto Adjust button / Exit: 2. OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. NOTES Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock. Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor. For maximum protection, repackage your monitor as it was originally packed at the factory. To maintain the cleanness of your LCD display, wipe it periodically with clean and soft cloth. To keep the monitor looking new, periodically clean it with a soft cloth. [. . . ] Resolution Plug & Play EPA ENERGY STAR® Input Connector Input Video Signal ON Mode OFF Mode 20" Widescreen 0. 258mm(H) × 0. 258mm(V) R, G, B Analog Interface 30kHz ­ 83kHz 55-75Hz 16. 7M Colors 146. 25MHz 1680 x 1050@60Hz VESA DDC2BTM 49W 1W 15-pin D-Sub Analog:0. 7Vp-p(standard), 75 OHM, Positive Maximum Screen Size Power Source Environmental Considerations Dimension Weight (N. W. ) DVI-D Digital signal Horizontal : 433. 44mm Vertical : 270. 9mm 100~240VAC, , 47~63Hz Operating Temp: 5° to 40°C Storage Temp. : -20° to 60°C Operating Humidity: 10% to 85% 471. 5(W)x380. 2(H)x210. 8(D)mm 4. 9kg Separate Sync. H/V TTL 16 Switch External Controls: Functions Power Consumption Audio Output Regulatory Compliance ( Maximum ) Auto Adjust Key < / Volume > / Volume Power Button MENU Luminance Image Setup Color Temp. Color Boost Picture Boost OSD Setup Extra 49 Watts Rated Power 1. 5 W rms (Per channel) FCC, cULus, TCO'03 17 Preset Display Modes HORIZONTAL FREQUENCY 31. 47kHz 31. 47kHz 31. 47kHz 35. 00kHz 37. 50kHz 37. 86kHz 37. 879kHz 46. 875kHz 35. 16kHz 48. 01kHz 49. 725kHz 48. 363kHz 56. 476kHz 60. 02kHz 64. 00kHz 80. 00kHz 65. 29kHz VERTICAL FREQUENCY 70Hz 70Hz 60Hz 66. 6Hz 75Hz 72Hz 60Hz 75Hz 56Hz 72Hz 75Hz 60Hz 70Hz 75Hz 60Hz 75Hz 60Hz STANDARD Dos-Mode Dos-Mode RESOLUTION 640 × 350 720 × 400 640 × 480 VGA 640 × 480 640 × 480 640 × 480 800 × 600 800 × 600 SVGA 800 × 600 800 × 600 832 × 624 1024 × 768 XGA 1024 × 768 1024 × 768 SXGA WSXGA 1280 × 1024 1280 × 1024 1680 x 1050 18 CONNECTOR PIN ASSIGNMENT 1 6 11 5 10 15 15 - Pin Color Display Signal Cable PIN NO. [. . . ]