User manual ENVISION EN980E

[. . . ] The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Warning To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Refer servicing to qualified personnel only. EN-980e 2 31MY02 For Your Safety Precautions · Do not use the monitor near water, e. g. [. . . ] Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinners, benzene, or abrasive cleaners, since these will damage the cabinet. Always unplug the monitor before cleaning it. EN-980e General Features: · 19" (48. 3 cm) Color Monitor · Crisp, Clear Display for Windows · Supports Resolutions up to 1600 X 1200 pixels @75Hz · EPA ENERGY STAR® Package Contents The box that your monitor was shipped in should have included the following items: 1. Booklet (containing Warranty and Safety information) Using the Right Power Cord The supplied power cord is a NEMA 5-15 style plug. If the monitor will be connected to your computer's power outlet, use a minimum No. 18 AWG, type SJT or SVT three conductors cord with one end terminating with a male grounded plug, rated 10A, 250V, CEE-22. The other end must terminate with a molded-on type connector body, rated 10A, 250V, having standard CEE-22 female configuration. EN-980e 4 31MY02 Before You Operate the Monitor Installing & Removing the Base EN-980e EN-980e 5 31MY02 Before You Operate the Monitor Connecting the Wires Using the Power Cord Supplied EN-980e 1. Connect the built-in video cable into the 15-pin connector on the back of your computer and tighten the two screws. Plug the other end of the power cord into a grounded AC outlet or UL-approved power strip. Caution: Make sure the power cord is the correct type that is required in your area. This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage areas (no user adjustment is required). If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied). EN-980e 6 31MY02 Before You Operate the Monitor EN-980e Connecting the Wires Using An Optional Power Cord (Not Supplied) The power cord supplied with your monitor can only be connected to a grounded electrical wall socket or power strip. If you wish to connect your monitor to a power supply using the power input socket on the back of your computer, you must purchase a power cord with CEE-22 terminated connectors (see illustration above). Follow these steps: 1. Connect the built-in video cable into the 15-pin connector on the back of your computer and tighten the two screws. Plug the other end of the power cord into the power output socket on your PC. EN-980e 7 31MY02 Operating Instructions Front Panel Buttons EN-980e Exit: Press this button to save changes and close the OSD window. Brightness: Press this button to adjust the picture's brightness. If the OSD window is open, this button allows you to move within the window and select desired functions. [. . . ] · Press a key on the keyboard or wiggle the mouse to re-activate the monitor. · Make sure the video cable is properly connected to the computer. · Inspect the video cable and make sure none of the pins are bent. [. . . ]