User manual ENVISION EN7450

[. . . ] Do not allow sharp objects such as knives, pens, or pencils near the screen. If such objects touch the screen, the LCD panel will be permanently scratched. When cleaning this monitor, disconnect it from the electric socket to avoid any danger of electrocution. A soft, lint-free cloth should be used to clean the outside of the monitor. [. . . ] Connecting the audio cable If your computer is equipped with an audio output port, then connect one end of the sound cable to the audio input connector of the monitor and the other end to the Line-Out connector of the computer. English Deutsch Français To connect the monitor to the power source 1. Connect one end of the power supply cable with the power supply and plug it into an electrical outlet. USB Ports The monitor features four USB ports (one upstream and three downstream), which are located on either side of the monitor stand. First start your computer and then turn on your monitor using the power switch. The status indicator should light up blue. 2. Adjust the image to meet your requirements (see the following sections "Basic Setup and "Image settings using the OSD menu). 3. If there is no image displayed on the monitor, consult the section "Troubleshooting". BASIC SETUP Automatic Image Adjustment (not available in DVI digital mode) You can adjust the image settings (such as brightness, contrast, image position, phase, etc. ) manually or by using the LCD monitor's automatic image adjustment feature. This will adjust the image parameters to their optimal settings for the current graphics mode. Setting the volume directly You can adjust the volume directly by pressing button > ( in fig. You can then change the volume by pressing the buttons < or > ( and in fig. Shortcut for adjusting brightness and contrast You can adjust contrast and brightness directly by pressing the < button ( in fig. then you need to press < or > to select either brightness or contrast then press menu to activate it, Press the > button ( in fig. Locking and Unlocking the OSD To lock and unlock the OSD menu, hold down the button combination < ( in fig. 4) until a corresponding message is displayed. 4 IMAGE SETTINGS USING THE OSD MENU English The OSD menu is a window on your screen that allows you to view and change display settings. To change an OSD setting: Deutsch Français Press the MENU button ( in fig. Select the desired submenu by pressing the OSD button < or > ( and in fig. If you selected submenu, now select the sub-function you want using < or > ( and in fig. 5. Set the desired value using the OSD button < or > ( and in fig. 4) The current settings are automatically saved when you return to the previous level or exit the OSD menu. The OSD menu automatically disappears if no changes are made for more than 45 seconds (default setting). 4) to go back to previous level of menu or sub-menu. Nederlands 5 OSD MENU FUNCTIONS Brightness/Contrast Brightness: Adjusts brightness by using the buttons < or > (and in fig. Contrast: Adjusts screen contrast by using the buttons < or > ( and in fig. 4). Image Control (not available in DVI digital mode) Auto Adjustment: Automatically selects the optimal settings for image parameters (image position, phase, etc. ) by using the button MENU ( in fig. [. . . ] Is the PC turned on (see your PC's documentation)? Display Problems Image is displaced to the left/right or to the top/bottom If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see chapter " Basic Setup , section " Auto Image Adjustment . Image flickers or is shaky Perhaps setup file chosen for the monitor is incorrect. For information on monitor setup under Windows®9x/ME/2000/NT/XP consult the " Configuration section. Image is blurred Check brightness and contrast settings (see chapter " OSD Menu Functions , section " Brightness/Contrast ). Check the resolution setting (see " Other functions in the " OSD Menu Functions section). Color problems If the colors are off (e. g. [. . . ]