User manual ENGENIUS FREESTYL 1

[. . . ] Caution: Your wireless telephone gives you freedom and flexibility to stay in touch while you move around. However, when using your phone equipment, safety instructions should be followed to avoid the risks of fire, electric shock, injury to person, and damage to property. When using your wireless phone, ensure your safety and the safety of others: a. Remember: if you are in an area where your phone does not have a clear signal from the base, it is highly probable that the call may not go through. [. . . ] Hear bi-bi-beep while the initiating handset broadcast all handsets within communication coverage c. Start to speak the message to be broadcasted once you hear the "beep" sound; the speakerphone of destination handsets will be opened up d. Hear bi-bi-beep while the initiating handset broadcast the base stations. Start to speak the message to be broadcasted once you hear the "beep" sound; the speakerphone of the base will be opened up d. When an incoming call arrives, the ringer will ring, the speaker LED will flash. [Note] Intercom numbers (Handset ID) are not stored in the last 10 numbers dialed log. Press key, after hearing the dial tone, followed by key, the last dialed number will be dialed. Handset 12), the ringer will ring or vibrate unless the ringer has been turned off. If the handset is not on the cradle, press any key (except SILENT soft key) to answer. When an incoming call arrives, the LCD will show the caller ID message, and the ringer will ring or vibrate unless the ringer has been turned off. Re: You can turn on the "Any Key Talk" from MENU-5-2 notes: 1. You can press SILENT (Left) soft key if you choose to ignore the call. Unlike turning off the ringer (from the handset menu), the SILENT key operation is valid only for the current call. If the LCD shows "Private" or "Unknown", the caller's information may have been blocked by the caller or the originating phone company. You can press the SILENT (Left) soft key if you choose to ignore the call. Unlike turning off the ringer the SILENT key operation is valid only for the current call. When an intercom call arrives (called from Base), the ringer will ring or vibrate unless the ringer has been to answer the intercom call. From Handset To end a telephone or intercom call, press Key, or place handset into From Base To end a telephone call, press key. To return to the conversation, press UNHOLD (Left) soft key notes: 1. The call being placed on hold can be "un-hold" by the handset that puts it on hold. But if the handset press key to go back standby, then other handsets can press or to pick this held call (If press on base, it can also pick up this held call). An alert tone (double beep) every 30 seconds will remind the handset that a call is being on hold. [. . . ] Press "6" to set Base Settings: When enter this menu, you must enter PIN code first (4 digits). If the duration not match with PSTN or PBX setting, it may operate faultily. Press "3" to set Assign Next HS (1) Enter 2-digit handset ID followed by pressing OK (Left) soft key. (2) When register a new handset, the base will assign the specific handset ID which assigned in advance to the new handset. [. . . ]