User manual ENGENIUS DURAFON 1X

[. . . ] Table of Contents Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 General Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Battery Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use Up or Down Arrow Key to scroll through the last 10 phone numbers dialed. [Note] Intercom numbers (Handset ID) are not stored in the last 10 numbers dialed log. When an incoming call arrives, the ringer will ring or vibrate unless the ringer has been turned off. If the handset is on the charger cradle (ringer will be temporarily switched to "Ring" if it has been set to "Vibrate"), lift the handset and start the conversation. If the handset is not on the cradle, press any key (except END, and the ~25~ Ending a Call To end a telephone or intercom call, press END key or place handset into charging cradle. The new setting remains effective for all future calls until changed. ~26~ Placing a Call On Hold 1. When a call is in progress, it can be put on hold by pressing the HOLD (Right) soft key. To return to the conversation, press "UNHOLD" 11 call arrives, press SILENT (Left) soft key. To prevent accidental dialing, you can press Menu (Right) soft key, then press "1" to select KeyGuard option. To unlock the keypad, press "UNLOCK" (Left) soft key, then, within 2 seconds, press the digit "1" to unlock. Whenever you have missed incoming call(s), you can press VIEW soft key to enter the call logs information. You need to subscribe the caller ID service from local telecom company to retrieve this data. You can replace the handset battery after placing the call-in-progress on hold. Battery talk time and standby time vary depending on the talk/standby pattern and the operating distance. Returning the handset back to the charging cradle as often as possible is recommended for best performance. Use only manufacturer provided battery and charger! You have 1 Missed call VIEW You have a Call on hold UNHOLD OPTION Welcome!The call being placed on hold can only be "un-hold" by the handset that puts it on hold. An alert tone (double beep) every 30 seconds will remind the handset that a call is being on hold. If the operation (e. g. , call transfer) after putting a call on-hold fails, the held call may be dropped. You can power off the handset (e. g. , change battery) while call is on hold. After power on again, you can continue the call by pressing UNHOLD (Left) soft key or select "3" from the Option menu to terminate the hold state. You can only unhold the call when within the coverage area of the base. [. . . ] Press "3" to select language (1) Use or to select English, French, or Spanish. While viewing any of the three call logs, press DIAL to dial the phone number. Notes: 1. Caller ID service is required from your local phone company in order to receive phone numbers, names and time stamps on incoming calls. The Received and Missed Call Logs will register no incoming calls if Caller ID service is not available. d. [. . . ]