User manual ENERGY SISTEM ENERGY F3510

[. . . ] In addition, they include 3 interchangeable frames in different styles. We recommend that you fully read this user manual in order to enjoy the product in a safe way and with the best results. CARE AND MAINTENANCE Do not expose your EnergyTM digital Photo frame to shakes, dust, direct Keep the device clean and dust free with a soft and dry cloth. Clean the unit while it is turned off and unplugged from electric power. [. . . ] Use the MODE button to move the cursor from left to right, and the buttons UP/ DOWN to move up and down respectively. On the top right corner of the screen you can see the type of the memory card being used, and a message in the middle will inform the current mode of visualization. Important: Do not leave the same image still for more than one day because you risk damaging the TFT screen. We recommend changing the image at least once or twice a day, or even better use slide show with a high elapse time. Using the MODE/DOWN/ UP/ESC buttons you can move the amplified image to the left/up/down/ right respectively. To exit the zoom mode, press ENTER three more times to return to single show. Press three more times the ENTER button to fully rotate the image back to the original position. Press MODE button while watching an image to enter the slide show mode. Images inside the built-in memory or the memory card will be displayed sequentially. To modify the wait time between images, press repeatedly MODE and select your desired time interval. To get back to single show mode press ENTER, and to go back to the thumbnails press ESC. Images to the built-in memory you must have a compatible memory card inserted. In this screen, you have four options to manage the built-in memory: "Copy one": Select this option to copy one image from the memory card to the built-in memory. On the bottom left corner of the screen you will see the messages "PROCESSING. When you are done copying images, press ESC to exit the thumbnails back to the SETUP menu. "Copy all": Select this option to copy all the images in the inserted memory card to the built-in memory. the images will be transferred sequentially and a status message will be displayed for each one. "Delete all": To delete all the images in the built-in memory at once press ENTER while selecting this option. On the bottom left corner of the screen you will see the messages "PROCESSING. "Delete one": Use this option to delete images from the built-in memory one by one. [. . . ] Com and select your product to view the FAQ (Frequently Asked Questions). The solution to your problem is very likely to have been already published there. You will also be able to download user manuals, user guides, drivers and updates. If you cannot find an appropriate solution in the Support section, you may send us your enquiry or warranty service request by email: support@energysistem. [. . . ]