User manual ENERGIZER ER-CH3

[. . . ] 12V DC Car Cord Specifications 12V DC 50 mAh 1000 mAh @ constant current mode Charge Termination: Fixed voltage (7. 2V batteries only) Input: Standby Current: Charge Current: Abnormal Battery Detection The charger has built-in. [. . . ] l Timer Protection. Refresh/Discharge Mode With the battery properly connected, press the Refresh Button (C) one time to start the refresh mode; battery discharge begins immediately, as indicated by Battery LED Indicator (B). When refresh is complete, the charger automatically switches to Fast-Charge Mode. Fast-Charge Mode As soon as the battery is properly connected, fastcharge begins, red color indicated by Battery Status Indicator. When charging is complete and the Battery Status Indicator is green, the battery can be removed for use; however, it is recommended you leave the battery connected to the charger for another 30 minutes, to ensure a full, or "topped off" charge for peak performance. The charger automatically switches to a small maintenance, or trickle charge to keep the battery in peak condition. Battery Status Indicator Red Green Flashing Red Battery Status Battery Charging Completion of Charge Problem of Any Type Installation of Adapter Plate To Install adapter A into the base unit, place adapter A facing up (minus sign on the left and plus sign on the right). Align top and lower brackets of adapter A with base unit's top and lower notches. To lock in place, hold the left side of Adapter A in place with your thumb. [. . . ] l The Battery LED Indicator may flash during charging; this is normal, due to fluctuation of battery terminal voltage during pulse charging. Canon Hitachi RCA [. . . ]