User manual ENCORE ENXDVR-4C

[. . . ] ENXDVR-4C Digital Surveillance in a Box 4 Channel Digital Video Recorder And 4 CCD Security Cameras with Night Vision User's Manual Copyright © 2010 by Encore Electronics Inc. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of Encore Electronics Inc. reserves the right to make improvements in the products described in this manual at any time without notice. Information provided in this manual is intended to be accurate and reliable. [. . . ] The following options are available: 5, 10, 15, 20, 25, 30, 45, 60, 90, 120, 150 or 180 seconds. 3. 6. 5 Alarm Mode To setup the alarm mode when motion is triggered. "Mute": no beeping " " Buzzer-Short": emit a small beep when something is detected. Buzzer-Long": emit a longer beep when something is detected. " Alarm-Short": sound the external alarm for a short time when the alarm is triggered. " Alarm-Long": sound the external alarm for a short time when the alarm is triggered. 3. 6. 6 Alarm Time Sets how long recording lasts after the alarm. The following options are available: 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55 or 60 seconds. 27 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER'S MANUAL www. encore-usa. com 3. 6. 7 Trigger Full Screen When activated the channel that detected movement will be maximized to fill the whole screen. " OFF": It will not display in full screen when the channel is triggered. Also, the trigger area will turn to "red-color" 3. 6. 8 Trigger Type Initial Trigger and Continuous Trigger are available. Initial Trigger: timing starts when the first movement is detected, and stops when the allotted time is finished. Continuous Trigger: timing starts when the first movement is detected, but the amount of recording time elapsed is reset every time more movement is detected. 3. 6. 9 Motion Area Setup Select the motion detection area. Press " " or right-click to 28 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER'S MANUAL www. encore-usa. com 3. 7 System Setup To set up the Password, time, date and button beep. . . etc. 3. 7. 1 Query Error Message Display logs for all error messages. " ": Clear all error messages. 29 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER'S MANUAL www. encore-usa. com 3. 7. 2 View Setup Set which items appear on the main in recording mode. 3. 7. 2. 1 Icon Help When it is OFF, no icons will appear on the main recording screen. Alternatively, icons can be disabled individually as detailed in the sections below. 3. 7. 2. 2 Error Message Information System will save all error messages, all messages will be cleared after reboot. " ON" - Display the error message. "X OFF" ­ Does not display the error message 30 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER'S MANUAL www. encore-usa. com 3. 7. 2. 3 State Information It includes record light, hard drive information, date/time information and rotate information. All information can be set separately to be seen or not. 3. 7. 2. 4 Channel Information Channel information includes channel number, channel name, record light, video loss, record mode, detector mode and alarm view. All information can be set separately to be seen or not. . , , , , , , Channel Number : Video Signal Status : Recording status : Detection mode and status (Icon will blink when motion is triggered) : Alarm Active : Buzzer active 31 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER'S MANUAL www. encore-usa. com 3. 7. 3 Date/Time Setup Setting up date and time 3. 7. 3. 1 Date View Mode Sets the date display format Ex: DD/MM/YYYY, MM/DD/YYYY or YYYY/MM/DD. 3. 7. 3. 2 Time Set To setup the day/time. / /( ( / ): change the number / ): move selection left or right : exit 3. 7. 3. 3 Time Zone Set the time zone where you are located. 32 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER'S MANUAL www. encore-usa. com 3. 7. 3. 4 Daylight Saving Time Set daylight savings time settings. 3. 7. 3. 5 NTP Server Synchronize DVR day/ time to NTP server through internet. · · · · Server Active: " Enable"-To set this function available. " X Disable"Ignore this function Server IP: The IP address of NTP server Interval (Days): Set how many days to synchronize Synchronize Now: Select it to start Synchronizing the NTP server 33 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER'S MANUAL www. encore-usa. com 3. 7. 4 Button Beep Setup The system beep will sound when certain events occur. Each can be set to mute, Sound A, Sound B or Sound C. (Keypad beep setting is available for the keypad equipped models) 3. 7. 5 Input Device Setup To setup the speed of input device: mouse, mouse repeat, keypad and IR remote as Slow, normal or fast 34 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER'S MANUAL www. encore-usa. com (Keypad repeat speed is available for the keypad equipped models) 3. 7. 6 Auto Exit Menu Set the menu to automatically exit after a period of time. Set to OFF to only exit manually, otherwise exit after 10, 20, 30, 40, 50 or 60 seconds. 3. 8 Hardware Setup 3. 8. 1 Authentication Setup Set user permissions. : create a new account or delete account. " ( ), ( )": set the permissions. An "X" indicates that user does not have permission. 35 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER'S MANUAL www. encore-usa. com (Account Active): The account is active. Password (Password): By entering six characters or numbers as password. Remark: · · Settings that are disabled for all users can be freely adjusted without entering a password. If all accounts are disabled then all settings can be changed by anyone. 3. 8. 2 Hard Drive Setup To set up the hard drive information and the overwriting function. 3. 8. 2. 1 Overwrite enable " YES": The hard drive automatically writes over the oldest video on the hard drive when it runs out of space for recording "X NO": Recording will stop when the hard drive is full. 3. 8. 2. 2 Hard Disk Info Summary It will display the Hard Drive model No. [. . . ] Use your mouse to select the starting point, then press the "Mark In" button. Use your mouse again to select the end point, then press "Mark Out" Then go back to the drop down menu and select "Export". 74 ENXDVR-4C 4 Channel Surveillance DVR with 4 Cameras USER'S MANUAL www. encore-usa. com 6. 3 Web Browser Viewer You can remote control the DVR unit through IE Browser Before starting to IE Browser, please make sure Active-X is installed. ActiveX can also be installed from the web site or directly from the DVR through the webpage. Or bring up your internet browser such as the Internet Explorer then type-in the DVR IP address to URL field bar (you may refer to section 7. 3. 6 IP Address Setup for more information). [. . . ]