User manual ENCORE ENTC-1000

[. . . ] ENTC-1000 Encore Thin Client User Manual v1. 04 (This page is intentionally blank) Page 2 of 51 Copyright © 2007 Encore Electronics, Inc. ENTC-1000 Encore Thin Client User Manual v1. 0 FCC warning This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation CE Mark warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate preventative measures. Note The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment such modifications could void user's authority to operate this equipment. Caution To comply with the FCC RF exposure compliance requirements, a separation distance of at least 20cm must be maintained between the device and user Unauthorized modification of product will void warrantee and violate FCC regulations Page 3 of 51 Copyright © 2007 Encore Electronics, Inc. (This page is intentionally blank) Page 4 of 51 Copyright © 2007 Encore Electronics, Inc. ENTC-1000 Encore Thin Client User Manual v1. 0 Legal Statement Trademarks The E logo, ENCORE ELECTRONICS, and other Encore trademarks are registered in United States and other countries. Microsoft, Windows, and Microsoft logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ] Make sure that there are no users logged in and no other operations running on the server prior to the installation 2. Windows 2003 Server CD should be ready before installation of the Terminal Server starts - Login to the Windows 2003 Server as Administrator or equivalent. - Click "START", go to "Administrative Tools", and then click on "Manage Your Server". A new Wizard window will appear on the screen. Page 15 of 51 Copyright © 2007 Encore Electronics, Inc. - Click "Add or remove a role" Page 16 of 51 Copyright © 2007 Encore Electronics, Inc. ENTC-1000 Encore Thin Client User Manual v1. 0 - A new window similar to the picture above will appear, Click the "Next" button Page 17 of 51 Copyright © 2007 Encore Electronics, Inc. - Click to select "Terminal Server". Click "Next" Page 18 of 51 Copyright © 2007 Encore Electronics, Inc. ENTC-1000 Encore Thin Client User Manual v1. 0 - At the next window (above), click "Next" to confirm installation of the Terminal Server. Page 19 of 51 Copyright © 2007 Encore Electronics, Inc. - The next window box warns you that your computer will restart. Click "OK" to accept and continue. Page 20 of 51 Copyright © 2007 Encore Electronics, Inc. ENTC-1000 Encore Thin Client User Manual v1. 0 - The next window shows installation status Page 21 of 51 Copyright © 2007 Encore Electronics, Inc. - If you have not done so, please insert Windows 2003 Server CD into the CD-ROM drive then click "OK" to continue. - Remove the Windows 2003 CD while the server is re-starting to avoid booting from the CD - After the installation is successful, you may now activate and add the Terminal Server license. Refer to your Windows 2003 Terminal Server license installation instruction. Page 22 of 51 Copyright © 2007 Encore Electronics, Inc. ENTC-1000 Encore Thin Client User Manual v1. 0 Configuration of user's access rights By default, the built-in "Remote Desktop Users" group and its members have full access to the Terminal Server remotely. Initially, this group has no members; you have to add member manually. You may also want to create a new group instead of using the builtin group, add users to the group and manually assign access rights to the Terminal Server to this group. To add users to the "Remote Desktop Users" group in Windows 2003 Server running Active Directory: - Click "Start", go to "Administrative Tools", and click "Active Directory Users and Computers" - Located at the left pane, click to select "Built-in" - Located at the right hand pane, double click on "Remote Desktop Users" - A Remote User Desktop Properties dialogue box will appear. Click on the "Members" tab then click "Add" - At the "Select This Object Type" field, make sure it is on "Users, Group. . . etc" - The "From Location" should have your domain name - Place your cursor to the "Enter your object names to select" field and type the username of the target accounts for users of the Terminal Server. For general information on setting up XDMCP service, go to http://tldp. org and search for "XDMCP". Contact your system administrator if you cannot log in as the "root" user. CentOS 4. 4 / Red Hat Enterprise Linux compatible systems (with Gnome Display Manager) 1) Configure your firewall to allow UDP port 177. For testing purposes, you can also disable the firewall entirely to avoid configuration mistakes. Page 25 of 51 Copyright © 2007 Encore Electronics, Inc. Start the Security Level Configuration Tool by selecting Main Menu Button (on the Panel) ( System Settings ( Security Level, or enter the command system-config-securitylevel from a command terminal. Add the following text to the "Other Ports" field (entries are separated by commas), 177:udp 2) Open and edit the GDM configuration file with a text editor. Search for the following section, Page 26 of 51 Copyright © 2007 Encore Electronics, Inc. ENTC-1000 Encore Thin Client User Manual v1. 0 [xdmcp] Enable = false and change it to [xdmcp] Enable = true Also, add the following line in the [xdmcp] section, or uncomment it if it has been commented out, port = 177 Remember to save your changes. If your system starts in text mode, you need to change the default "runlevel" to 5. Look for a line similar to the following text, id:5:initdefault: This line specifies the runlevel 5 as the default runlevel. If the line specifies a different runlevel on your system, modify it to runlevel 5 and save your changes. Please note that if you are using the graphical user interface on your Linux system to make the above configurations, restarting GDM will interrupt your session! [. . . ] Wait for several second until device boots to logo screen (see below). Page 40 of 51 Copyright © 2007 Encore Electronics, Inc. ENTC-1000 Encore Thin Client User Manual v1. 0 3. The dialog will display a different input parameter depending on which protocol you want to use. The above dialog is displayed when the Windows server, which uses "RDP", Remote Desktop Protocol, is chosen. Color Depth, the lower the color depth, the better the response time; the higher the color depth, the shaper the display. Audio Playback audio playback can be turned off, controlled Page 41 of 51 Copyright © 2007 Encore Electronics, Inc. locally, or left to remote server setting. If user chooses Unix/Linux server, which supports X-window protocol, the above dialog will display. [. . . ]