User manual ENCORE ENPS-2012

[. . . ] Trademarks NetWare is a registered trademark of Novell Inc and Windows 95/98/Me and Windows NT/2000/XP/2003 are registered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. Copyright No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation, transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United States Copyright Act of 1976. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to subpart J of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] Cold Start or Warm Start When the print server restarts, the cold start or warm start trap message is generated. When the print server received a SNMP request with a community name that does not match the community name the Authentication Failure 5 - 20 Configuration from Embedded Web Server print server is configured with (stored in the print server's memory), an authentication failure trap message is generated. In the print server's SNMP implementation, the following MIB objects are available for updating. MIB Object Names system. sysContact Description Indicates the network administrator's name. print for system. sysName system. sysLocation Indicates the location of the print server. snmp. snmpEnableAuthenTraps Enables or disables the function of sending SNMP Authentication Failure trap message to the network administrator, if the community name within a SNMP request is not correct. 5 - 21 Configuration from Embedded Web Server Users can set up print server's SNMP functions by using their browsers. Click SNMP, it then as shown in the following picture. SNMP Community: The print server supports up to two community names. The default community name is public (case-sensitive), with Read Only access right in default. Support HP WebJetAdmin: This option allows user determine to disable/enable the Support HP WebJetAdmin. 5 - 22 Configuration from Embedded Web Server SNMP Traps: Enable the function of sending SNMP Authentication Failure trap message to the network administrator, if the community name within a SNMP request is not correct. AppleTalk Setup The print server can print jobs submitted from Macintosh workstations connected to an Ethernet using AppleTalk protocol. The basic configuration is for the print server in an AppleTalk environment is performed simply by opening the Chooser window and selecting a printer that is connected to the print server. 1. Click AppleTalk, it as shown in the following picture. 5 - 23 Configuration from Embedded Web Server 3. Zone Name: In this option, type an AppleTalk Zone name that you want the print server to belong to or leave it in default (This enables the print server automatically search and link itself to the default zone that is set on the AppleTalk router, if found). If no any zone exists, the print server itself displays the zone name as an asterisk (*) in the current AppleTalk Status of the print server in the web browser. Port Name: In this option, type a name for identification purpose or just leave it in default (recommended). Note: The default print server's Chooser name is as shown as follows: <ATALK_PS>-xxxxxx-1, where xxxxxx represents the last six digits of the device's Node ID. You may also change the <ATALK_PS> to a name you like for identification purpose in this option. The print server will append the last six digits to the name you specify. Printer Type: In this option, the LaserWriter of printer type by default (recommended). Data Format: In this option, data format includes ASCII, TBCP and BCP. 5 - 24 Configuration from Embedded Web Server Setting Up a Macintosh Computer 1. Select the Zone name that you specified when configuring the PRINT SERVER. 2. Note: If you select a Zone that the PRINT SERVER doesn't belong to, as you specified in the previous section, no print server will be displayed in the Step 4. 3. If you are using a PostScript printer you can select the LaserWriter 8 icon. The Chooser window then displays PRINT SERVER (s) featuring the support for AppleTalk protocol, along with its default Chooser Name in the right-hand Select A PostScript Printer dialog box. 4. Note: You may change the default Chooser name and Zone name of a PRINT SERVER by using your web browser before proceeding with this installation. Please see the previous section in this chapter for details. 5 - 25 Configuration from Embedded Web Server 5. If your printer does not appear in the PPD file list, please contact your printer vendor. [. . . ] On your NT server, type, for example, "arp -s 192. 72. 214. 68 00-40-01-3F-02-AB". Please note, in this arp command you have to type 192. 72. 214. 68 on purpose. The configuration file will then be retrieved and transferred to your NT server. In your editor, modify "BoxIPAddress" field from "0. 0. 0. 0" to "192. 72. 214. 100". [. . . ]