User manual ENCORE ENP656-IV-CICM QUICK START GUIDE

[. . . ] Quick Start Guide Thank you for purchasing this PCMCIA Fax Modem Card Installing the Fax Modem Card You will be installing the modem in the Type II or III PCMCIA slot in your computer. If you are having trouble locating this slot, refer to your computer's user manual or consult the manufacturer of your computer. [. . . ] Setup for Windows 95 Windows 95 comes with most of the drivers necessary to access your fax modem. Start the Computer Insert the fax modem card into a PC Card slot in your computer, making sure the card is securely inserted into the socket Windows will display the "New Hardware Found" dialog box. Select the "Driver from disk provided by hardware manufacturer" and click "OK. " If you do not see the above selection, simply click "Next" to continue. (For Windows 95 Release 2. 0 user: Insert the driver diskette into drive A: and click "Finish" to complete the installation process). The modem is now ready for use. 4. Setup for Windows 98 Windows 98 comes with most of the drivers necessary to access your fax modem. Start the computer Insert the fax modem card into a PC Card slot in your computer, making sure the card is securely inserted into the socket. Select the "Driver from disk provided by hardware manufacturer" and click "OK. " If you do not seethe above selection simply click "Next" to continue. The modem is now ready for use. 4. Setup for Windows NT 4. 0 Windows NT comes with most of the drivers necessary to access your fax modem. Start the computer Double click on "Control Panel/Modems, " select the "Don't detect my modem: I will select if from a list" option and press the "Next" button. Click on the "Have Disk" button from "Install New Modem" window and press the "Next" button. Windows then asks you to specify where the driver for the modem is located. Insert the fax modem drivers diskette into your floppy drive, select Drive "A:\" and click "OK. " Select the product name of fax modem from "Models" list box and press the "Next" button Select the available COM port from the list box and press the "Next" button. [. . . ] If you are installing a fax program, it may ask you what Class of fax modem you have. You should respond by selecting "Class 1" or "Class 2" (optional, please refer to your User's Manual) [. . . ]