User manual ENCORE ENM232-6C

[. . . ] PCI Sound Card ENM232-6C 5. 1ch Installing the Sound Card A. Hardware Installation Before you start, make sure that Windows 95/98/98SE, Windows Me, Windows 2000 or Windows ® NT 4. 0 has been installed in your system and running properly. [. . . ] There are two sets of pins, one for Mitsumi standard and the other for CD-IN Sony standard. *A MIDI adapter is required to connect a MIDI instrument to the sound card. The MIDI adapter can be purchased from your local computer store and is connected to the MIDI/GAME port. PCI Sound Card ENM232-6C 5. 1ch B. Drivers Setup Installing the Sound Card Driver under Windows® 95/98/98SE 1. After hardware installation has been finished, power up your computer and wait for Windows 95/98/98SE to boot up. The message box will show "Add New Hardware Wizard" and "This Wizard searches for new drivers for PCI Multimedia Audio Device". Insert the Multimedia software CD-ROM into your CD-ROM drive of DVD-ROM drive. Key in the drive and path for drivers/application installation program; for example, "D: \Sound\Cmi8738\SETUP. EXE". Click "ok" to start the applications/driver installation procedure, and follow the on-screen instructions to finish the installation. When all the application software has been installed, please restart your computer. Your system will install device drivers automatically. ® Uninstalling the Sound card Driver for Windows® 95/98/98SE 1. Find "Uninstall device drivers and application" program in PCI audio applications. [. . . ] Find "Uninstall device drivers and application" program in PCI audio applications. Follow the on-screen instructions to uninstall the device drivers or applications. [. . . ]