User manual ENCORE ENLGA-1320

[. . . ] As a bus master, the NIC requests access to the PCI bus, instead of waiting to be polled. 1. 1 Features The Gigabit Ethernet PCI adapter is a cost effective, high-performance network interface card. It operates in 10BASE-T, 100BASE-TX and 1000BASE-T modes and integrates easily with Fast Ethernet hub and Gigabit hub and switch. Complies with IEEE 802. 3 10BASE-T standard Complies with IEEE 802. 3u 100BASE-TX standard Complies with IEEE 802. 3ab 1000BASE-T standard Complies with PCI specifications Supports 32 bit bus master for high throughput and low CPU utilization Supports both half and full duplex operation Supports 10/100/1000Mbps auto-sensing capability Supports Wake-On-LAN (depend on model and user's motherboard function) Rich diagnostic LED mounted on bracket for easily viewing and troubleshooting LED 10M Link/Act 100M Link/Act 1000M Link/Act Function Green/Blinking Green Green/Blinking Green Green/Blinking Green Plug and Play Installation. Network drivers on the diskette for Windows 98SE, NT4. 0, 2000, XP, ME, Netware 4/5/6. X, and Linux driver. [. . . ] Windows ME will prompt "PCI Ethernet Controller" in "Add New Hardware Wizard" dialog box; insert driver disk bundled with "Gigabit Ethernet Network Adapter". Select "Install the software automatically" and then click <NEXT> button. Windows ME will prompt "Gigabit Ethernet Network Adapter" in "Add New Hardware Wizard" dialog box, click <FINISH> button to complete the installation. In the "My Computers" icon, double click the "Control Panel" icon. In the "Control Panel" icon group, double click the "Network" icon. In the "Network Settings" dialog box, select the Adapter" Tab, then click "Add" button. Insert this driver disk in drive A, enter drive and pathname "A:\Winnt4", then click the <OK> button. You will see that the "Gigabit Ethernet Network Adapter " string appears in the "Select OEM Option" dialog box, and click the <OK> button. Select the connection type in the "Gigabit Ethernet Network Adapter", and click <OK>. Follow the screen instructions and finish the rest of installation procedures. Windows 2000 will prompt "Welcome to the Found New Hardware Wizard" in "Found New Hardware Wizard" dialog box, click <NEXT> button. Windows 2000 will prompt "Ethernet Controller" in "Found New Hardware Wizard" dialog box, select "Search for a suitable driver for my device" and then click <NEXT> button. Select "Specify a location" from "Optional search locations:" of "Found New Hardware Wizard" dialog box, then click <NEXT> button. Insert driver disk bundled with "Gigabit Ethernet Network Adapter". Enter the driver pathname "A:\" then click the <OK> button from "Found New Hardware Wizard" dialog box. Windows 2000 will display "The wizard found a driver for the following device Ethernet Controller" in "Found New Hardware Wizard" dialog box, click <NEXT> button. Windows 2000 will display "Completing the Found New Hardware Wizard Gigabit Ethernet Network Adapter Windows has finished installing the software for this device" in "Found New Hardware Wizard" dialog box, click <Finish> to complete the installation. 5. Press the power button on the case of PC to turn it on Windows XP will prompt "Ethernet Controller" in "Found New Hardware Wizard" dialog box; insert driver disk bundled with "Gigabit Ethernet Network Adapter ". Select "Install the software automatically" and then click 5 5. Windows XP will prompt "Gigabit Ethernet Network Adapter " in "Hardware Installation" dialog box, click <Continue Anyway> button. Windows XP will display "The wizard has finished installing the software for Gigabit Ethernet Network Adapter/Fiber Gigabit Ethernet Network Adapter" in "Found New Hardware Wizard" dialog box, click <Finish> to complete the installation. Linux kernel 2. 2. x. Compiling rtl8169. c "gcc -DMODULE -Wall -Wstrict-prototypes -O6 -c rtl8169. c". Move the object code rtl8169. o to the directory "/lib/modules/2. 2. 14-5. 0/net". [. . . ] When the Server prompt appears, load the NetWare Server Installation Utility ==> "LOAD NWCONFIG" 3. Select "Driver options" from the "Installation Options" menu. Select "Configure network drivers" from the "Driver Options" menu. Select "Select a driver" from the "Additional Driver Actions" menu. [. . . ]