User manual ENCORE ENHWI-N2

[. . . ] ENHWI-N2 802. 11n Wireless LAN Router User's Guide i Regulatory notes and statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions however are far much less than the electromagnetic energy emissions from wireless devices like for example mobile phones. Wireless LAN devices are safe for use frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments for example: ·Onboard airplanes, or ·In an explosive environment, or ·In case the interference risk to other devices or services is perceived or identified as harmful In case the policy regarding the use of Wireless LAN devices in specific organizations or environments (e. g. [. . . ] Select "None" for the "Gateway address" field. Windows 2000 Double click on the "My Computer" icon on the desktop. When "My Computer" window opens, open the "Control Panel" and then open the "Network dialup connection" applet. In the "Local area network status" window, click on "Properties. " 2. In the "Local area network connection" window, first select TCP/IP setting and then select "Properties. " 3. Set both "IP address" and "DNS" to Automatic configuration. -9- Windows XP Point the cursor and click the right button on the "My Network Place" icon. Set "IP address" to "Obtain an IP address automatically. " 2. Set "DNS" to "Obtain DNS server address automatically. " - 10 - CONFIGURATION First make sure that the network connections are functioning normally. This WLAN Router can be configured using Internet Explorer 5. 0 or newer web browser versions. Login to the WLAN Router through Wireless LAN Before configuring the WLAN Router through WLAN, make sure that the SSID, Channel and the WEP is set properly. The default setting of the WLAN Router that you will use: SSID: ENHWI-N Channel: 6 Security: disable Login to the WLAN Router Before you configure this device, note that when the WLAN Router, make sure the host PC must be set on the IP subnet that can be accessed by the xDSL/Cable modem. For example, when the default network address of the xDSL/Cable modem Ethernet interface is 192. 168. 10. x, then the host PC should be set at 192. 168. 10. xxx (where xxx is a number between 2 and 254), and the default subnet mask is 255. 255. 255. 0. Enter IP address http://192. 168. 1. 1 (the factory-default IP address setting) to the URL web address location. When the following dialog box appears, enter the user name and password to login to the main configuration window, the default username and password is "admin". 11 Setup Wizard Setup wizard is provided as part of the web configuration utility. User can simply follow the step-by-step process to get the wireless Router configuration ready to run in 6 easy steps by clicking on` the "Wizard" button on the function menu. Please click "Next" to continue. Step 1: Set your new password Setting the new admin password of the WLAN Router. Please click "Next" to continue. - 12 - Step 2: Choose time zone Select the time zone from the drop down list. Please click "Next" to continue. Step 3: Set LAN connection and DHCP server Set user's IP address and mask. Please assign the range of IP addresses in the fields of "Range start" and "Range end". Please click "Next" to continue. Step 4: Set Internet connection The WLAN Router will attempt to auto detect your Internet Connection. - 13 - Obtain IP automatically (DHCP client): If the user has enabled DHCP server, choose "Obtain IP automatically (DHCP client)" to have the WLAN Router assign IP addresses automatically. - 14 - Fixed IP Address: If the Internet Service Provider (ISP) assigns a fixed IP address, choose this option and enter the assigned WAN IP Address, WAN Subnet Mask, WAN Gateway Address and DNS Server Addresses for the WLAN Router. - 15 - PPPOE PPPoE to obtain IP automatically: If connected to the Internet using a PPPoE (Dial-up xDSL) connection, and the ISP provides a User Name and Password, then choose this option and enter the required information. - 16 - PPPoE with a Specify IP address: If connected to the Internet using a PPPoE (Dial-up xDSL) connection, and the ISP provides a User Name, Password and a Fixed IP Address, choose this option and enter the required information. - 17 - PPTP: If connected to the Internet using a PPTP xDSL connection, enter your IP, Subnet Mask, Gateway, Server IP, PPTP Account and PPTP Password. - 18 - L2TP: If connected to the Internet using a L2TP (Dial-up xDSL) connection and the ISP provides a Server IP, Account and Password information, choose this option and enter the required information. - 19 - Big Pond Cable(Australia): If your ISP is Big Pond Cable, the ISP will provide a User Name, Password, Authentication Server and Login Server IP (Optional). Choose this option and enter the required information. - 20 - Step 5: Set Wireless LAN connection Click "Enable" to enable Wireless LAN. If user enables the Wireless LAN, type the SSID in the text box and select a communications channel. The SSID and channel must be the same as wireless devices attempting to connect to the WLAN Router. [. . . ] Type the host name or IP address in the text box and click Ping button to start the Ping test. - 52 - Remote Management This function enables users to set up remote management. Using remote management, the WLAN Router can be configured through the WAN via a Web browser. A user name and password are required to perform remote management. HTTP: Enables users to set up HTTP access for remote management. Remote IP Range: Type a range of IP addresses that can be pinged from remote locations Gaming mode: If user is experiencing difficulties when playing online games or even certain applications that use voice data, user may need to enable Gaming Mode for these applications to work correctly. [. . . ]