User manual ENCORE ENF656-EV-AGER

[. . . ] Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Further, this company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders. 56K Analog Modem 1 Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 5 3. 1. 2 For Windows 98SE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3. 1. 3 For Windows NT4. 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3. 1. 4 Additional Agere Modem Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3. 2 Contact Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 56K Analog Modem 2 1. Introduction Fax Modem Installation CD is an All-In-One installation utility for both internal and external Fax, Voice/Fax and Voice/Fax with Speaker Phone Analog Modems. It automatically detects and installs recently installed modem hardware under Windows 98SE, ME, 2000 and XP. This utility includes Install Driver, Install Software Utilities, User Manual and Readme four sections. Click Install Driver to start analog modem device driver installation process. Install Software Utilities includes "FaxTalk Communicator SE" (all modem software driver installation program), FaxTalk NetOnHold (modem software driver installation program for modems with Holdon-Call feature), Adobe Reader 6. 0 and Panda Antivirus Platinum 9. 0. User Manual includes this user's manual and specs for all modems this utility supports. Readme includes modem software driver locations and modem hardware installation instructions. 1. 1 System Requirements Pentium 100 Mhz CPU or faster 32 MB system memory or more 10 MB free space on your hard drive 256-color VGA or higher resolution CD-ROM drive One available PCI slot for internal modem; one available USB connector or RS232 connector for external modems Microsoft Windows 98SE, ME, XP, or 2000 operating system disk 1. 2 Package Contents One internal/external Analog Modem One RJ-11 Cable One USB Cable for USB model; One RS232 Cable for RS232 model 9V AC adapter for RS232 Analog Modem Fax Modem Installation CD CD-ROM disk Quick Installation Guide If any of above items is missing or damaged, please contact your local dealer immediately. 56K Analog Modem 3 2. Hardware Installation Instructions 2. 1 PCI Interfaced Analog Modem Card 1) Open PC case and insert PCI Card into an available PCI slot. 2) Close PC case, then plug one end of RJ-11 cables into modem's LINE jack and the other end into telephone wall jack. 2) Plug one end of RJ-11 cable into modem's LINE jack and the other end into telephone wall jack. 2. 3 Pocket sized RS232 and USB Analog Modem 1) Connect modem and PC with RS232/USB cable. [. . . ] Note: For locating modem's install program, please refer to the below list of Modem chipset and its NT40 directory. Agere HPI56L: \\Driver\Agere(Lucent) \Internal\PCI2\NT40\setup. exe Conexant VPI56SP: \\Driver\Conexant\Internal\Controlless\NT40\SETUP. EXE Intel VPI56SPA: \\Driver\Intel(Ambient)\Internal\Controlless\NT40\installer. exe 3) Follow the instructions on the screen to install modem. 4) When finish the installation, we recommend you to restart your computer for system's setting before you use the modem. [. . . ]