User manual EMTAC CRUX LOG

[. . . ] Click "BT", as "a" part shown in Figure 2, to auto-select COM port number connecting to the BT device. Click "Open", as "b" part shown in Figure 2, to search all the BT devices. b a Figure 2 3 6. After searching described in step 4, the window will show as Figure 3, and then select Trine, marked in Figure 3. Figure 3 7. [. . . ] Log ID: Set an ID to Trine, and "write" to update the Trine ID. After choosing the trigger condition from "Kinds of Trigger" and giving the "setting value", please click "Apply" to commit the setting. The sliding window below "Setting Value" displays the configuration of the current Trigger condition. Note: When used Trigger Function, the other functions will be disabled shortly until the "Apply" is available. For more information, please reference Advance section. 8 2. 6 Record This option can be set to "Get Record Number" or "Dump Record Data", please reference to the Appendix section for more details. The action is composed of the "Operate" options and parameters in the "Range". If the "Operate" is set to "Get Record Number", then the meanings of parameters in the Range is defined as follows: Total: Read all the number of data logs. Before: Read the number of data logs before the given Date1 and Time1. Between: Read the number of data logs between the given Date1/Time1 and Date2/Time. If the "Operate" is set to "Dump Record Data", then the meanings of parameters in the Range is defined as follows: Total: Read the data logs according to the given Begin and End number. Between: Read the data logs between the given Date1/Time1 and Date2/Time2. After choosing one of the configurations, please click " Apply" button to do the action and the result will be displayed in the "Status" field and the field below the "Status" if Data" is set. Note: Please DO NOT dump too much data that will cause the errors by lack of memory. "Dump Record 9 2. 7 Download This option is used to save data log in the \\My_Device\Trine_Data_Log, as for the data format, please reference to the appendix section for more details. Set Param region can be set with the given parameters: By: All Data: Download the all data logs. Sequence no. : Download the logs from the given " Begin" value to the given "End" value. [. . . ] Elapse Time;Stall Elapse Time: 0:Not Set , 1 - 255 secords set. 3-6. Reset Data Logger Trigger Setting to Factory Default Setting, Logger ID=0, No Trigger Set. 3-7-1. click "Apply Button 13 4. Appendix 4. 1 The Data format of Record $CmdID, Sub_CmdID, rec_no, yymmdd, hhmmss, fix, dop, DDMM. mmmm, DDDMM. mmmm, MM. [. . . ]