User manual EMERSON MA1200

[. . . ] If the polarized AC cord does not fit into a non-polarized outlet, do not cut or file the blade. You are responsible for having the obsolete outlet replaced with a polarized outlet. If you feel a static discharge when touching the unit, and the unit does not function, simply unplug the unit from the outlet. Do not install power cords near any heating element or cooking appliances. EMERSON RADIO CORP. 9 Entin Road P. O. [. . . ] Operating distance diminishes as you move to the sides of the TV. 6 Chapter 1 : Overview of Your Equipment CHAPTER 2 Connecting an Antenna or Cable to Your TV Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Please note that you will normally only have to make one of the connections shown below, not all of them. All connections will be made to the antenna terminal on the back of your TV. The antenna terminal is a silver metal post partially surrounded by two plastic tabs. pay-TV channels), follow these steps: Find the primary incoming coaxial cable. Plug this cable into a splitter (available at your local electronics store). Connect one coaxial cable between one OUT terminal on the splitter and the IN terminal on the converter box. Connect another coaxial cable between the other OUT terminal on the splitter and the B-IN terminal on an A/B switch (available at your local electronics store. ) Connect a third coaxial cable between the OUT terminal on the converter box and the A-IN terminal on the A/B switch. Finally, connect a coaxial cable between the OUT terminal on the A/B switch and the antenna terminal on the back of your TV. B OUT When the A/B switch is in the A position, you need to change channels on the converter box (and your TV should be tuned to channel 3 or 4); when the A/B switch is in the B position you can change channels on the TV. Connecting Other Pieces of Equipment You may want to connect a VCR, laser disc player, satellite receiver, or another type of equipment to your TV. We recommend that you follow the instructions included with the piece of equipment you wish to connect. OUT IN Safety Note If you plan on being away from your home for an extended period of time, or if a thunderstorm is approaching, you should unplug your television, and you may wish to disconnect your TV from a rooftop or satellite antenna. You do not need to disconnect your TV from a cable system. Chapter 2 : Connecting an Antenna or Cable to Your TV IN OUT IN OUT IN A Converter Box 9 CHAPTER 3 Operating Your TV Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batteries in the remote, you are ready to use the TV. 5 If the channel is in memory, then use the CVOLB button to delete the channel from memory. 6 If you are going to delete other channel, then press the w CHv buttons until desired channel is selected. 7 Wait 10 seconds, or press the MENU button four times to exit. 1 2 3 11 Set-Up Language : English Reception : Air Memorize Channels Add/Delete Channels Set-Up Language : English Reception : Air Memorize Channels Add/Delete Channels Select Adjust Next Select Adjust Next 4 5 6 Add/Delete Channels Air 11 This channel is not in memory. Press CH for other channels. Add/Delete Channels Air 11 This channel is in memory. Press CH for other channels. Add/Delete Channels Air 11 This channel is in memory. Press CH for other channels. Press MENU to return to Set-up menu. Press MENU to return to Set-up menu. Press MENU to return to Set-up menu. Displaying the Current Channel 1 To quickly see the current channel number and status, press DISPLAY button on the remote control. The current channel number and status will be displayed. 12 Chapter 3: Operating Your TV Adjusting Video Settings You may wish to adjust the video settings (e. To do so, follow these directions: 1 With the TV on, press the MENU button. 3 Use the w CHv buttons to select the video setting you wish to adjust. 4 Use the CVOLB buttons to adjust the video setting to the level you prefer. 6 When you are finished, press the MENU button until menu OSD will be disappeared. 1 2 3 Video Settings : Contrast : Brightness Sharpness Color Tint Select Adjust Video Custom Settings : Contrast : Brightness Sharpness Color Tint Select Adjust Video Preset Settings : Contrast : Brightness Sharpness Color Tint Select Adjust Preset Next Next Next 4 5 6 Contrast Brightness Chapter 3: Operating Your TV 13 Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps : 1 With the TV on, press the MENU button. [. . . ] 3 Wait 10 seconds, or press the MENU button to return to normal TV viewing. Your setting will remain intact until you change it. 1 Special Closed Caption : OFF CC on Mute : OFF Power Restore : OFF Auto Tint : OFF 2-1 Special Closed Caption : C 1 CC on Mute : OFF Power Restore : OFF Auto Tint : OFF 2-2 Special Closed Caption : T 1 CC on Mute : OFF Power Restore : OFF Auto Tint : OFF Select Adjust Exit Select Adjust Exit Select Adjust Exit 18 Chapter 5 : Additional Features CC on Mute When the sound is muted, user can select the caption display. 1 With the TV turned on, press the MENU button until "Special" menu will be displayed. 3 Use the CVOLB buttons to select "C1" or "C2". 1 2 3-1 Special Closed Caption : C 1 CC on Mute : C 1 Power Restore : OFF Auto Tint : OFF Special Closed Caption : C 1 CC on Mute : OFF Power Restore : OFF Auto Tint : OFF Special Closed Caption : C 1 CC on Mute : OFF Power Restore : OFF Auto Tint : OFF Select Adjust Exit Select Adjust Exit Select Adjust Exit 3-2 Special Closed Caption : C 1 CC on Mute : C 2 Power Restore : OFF Auto Tint : OFF Select Adjust Exit Power Restore User can select the On/Off status when the power cord put into the wall outlet. [. . . ]