User manual EMERSON HD6000

[. . . ] 6. ) Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 7. ) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 9. ) Unplug this apparatus during lightning storms or when unused for long periods of time. [. . . ] Note: In order to maximize the life of the built in lithium battery, please be sure to set the ALARM 1 and ALARM 2 switches to the "OFF" position if the radio will be disconnected from the AC outlet for more than a few hours. This will prevent the Sure Alarm from turning ` On'unnecessarily. 5 HD6000_110606. p65 5 6/11/2006, 9:47 L O C AT I O N O F C O N T R O L S AN D I N D I C AT O R S Front Panel 3 24 2 23 1 22 4 25 5 26 6 27 7 8 Top Panel 14 15 16 17 18 19 13 12 11 10 9 20 21 Left Side Panel Right Side Panel 24 25 26 23 27 22 6 HD6000_110606. p65 6 6/11/2006, 9:47 1. ) ALM 1 ` On'Indicator. 27. ) TUNING Control. 7 HD6000_110606. p65 7 6/11/2006, 9:47 O P E R AT I N G I N S T R U C T I O N S Setting The Time, The First Time IMPORTANT: The first time you connect your new SmartSet® clock radio to the AC outlet the internal computer will automatically set the time correctly for the Eastern Time Zone, which is the initial default setting. The display will scan for a few seconds and then show the correct Day and Time in the Eastern zone. If you do not live in the Eastern Time zone you must change the default zone display to your own zone. You only do this one time and the SmartSet® will remember the new default zone setting and will always return to that setting after a power interruption There are 7 time zones programmed into your SmartSet® clock radio as follows: ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 -- -- -- -- -- -- -- Atlantic Time Eastern Time Central Time Mountain Time Pacific Time Yukon Time Hawaiian Time (Default Setting) To change the default time zone display, depress the TIME ZONE button. The number "2" will appear on the display indicating that the default zone is ZONE 2, Eastern Time. Hold the TIME ZONE button and then press either the SET (Up) or SET (Down) buttons until your own time zone appears on the display, then release the buttons. The clock display will change to the correct time in the time zone you selected. The clock will always return to the correct time in the zone you selected after every power interruption. If you move to a different time zone, simply change the default zone display to the new zone and the SmartSet ® will remember that setting for you. 8 HD6000_110606. p65 8 6/11/2006, 9:47 Date Display To see the correct Date at any time, depress the MONTH/DATE button. If AM reception is weak, change the position of cabinet until the internal antenna picks up the strongest signal. FM ­ The FM antenna is built in to the AC power cord. If FM reception is weak try varying the position and direction of the power cord until you find the strongest signal. 13 HD6000_110606. p65 13 6/11/2006, 9:47 Wake To Radio 1. ) Turn the radio ` and select the band, station, and volume level that you wish On' to hear when the alarm comes on, then turn the radio ` Off'again. 2. ) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 3. ) Set the ALM selector switch for one or both alarms to the "RADIO" position. The appropriate ALM 1 and/ or ALM 2 indicators will light up to confirm that the alarms are set. 5. ) To stop the radio sooner, press either the appropriate ALARM 1 or ALARM 2 button, or press the RADIO ON/OFF button. The radio will stop but the alarm remains set and will turn the radio on again at the same time on the following day (depending on the Alarm Mode setting). 6. ) If you do not want the alarm to turn the radio on the following day, set the appropriate ALM selector to the "OFF" position. 14 HD6000_110606. p65 14 6/11/2006, 9:47 Wake To BUZZER (Crescendo Alarm) Note: Alarm 1 and Alarm 2 have different buzzer sounds. You will be able to tell which alarm is going off by the sound that it makes. 1. ) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 2. ) Set the ALM selector switch for one or both alarms to the BUZZER position. [. . . ] The initial default setting is "12:00 AM, Saturday, January 1st (1 1), 2005". If you notice that the time on your SmartSet ® clock radio is completely incorrect, and the Day indicator is also wrong, press the MONTH/DATE button to see the Date. If the Date display is showing "1 1" (January 1st ), you probably experienced a total memory loss. To reset the clock after a total memory loss, proceed as follows: 1. ) Follow the instructions on pages 17, 18 and install a new CR2430 lithium battery in the battery compartment. [. . . ]