User manual EMERSON EWD7002

[. . . ] OWNER'S MANUAL DVD PLAYER EWD7002 INSTRUCCIONES EN ESPAÑOL INCLUIDAS. If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1- 800 - 256-2487 Please read before using this equipment. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. [. . . ] Select an appropriate speed while referring to the speed indication on the screen. FWD D Button ×1/16 chapter search after setting them on the same screen at the same time. ¡When playback is stopped, press the numeric buttons to select a Title. Notes TT : _/ 12 CH : 12/ 49 ×1/8 ¡Playback from a desired title or chapter is not avail- able with some DVDs. ×1/2 ¡Some discs which the chapter number isn't dis- played cannot playback from a desired chapter. TRICKS WITH THE SKIP BUTTONS (H, G) 2 Press the PLAY button to return to normal playback speed. Notes ¡Slow playback is not available with audio CDs. ¡The reverse of slow playback is not available. If the SKIP button G is pressed during playback or while playback is paused, the current chapter will be skipped and the next chapter will be played. When the SKIP button H is pressed once, the top of the current chapter will be located for replaying. When the SKIP button H is pressed again within 2-seconds after playback begins, the previous chapter will be located. EN 1L25 ­ 15 ­ STARTING FROM A DESIRED TIME COUNT DVD CD 1 Press the SEARCH MODE button twice. ¡Example: 1 hour, 23 minutes and TIME 1:23:30 TOTAL 1:29:00 RANDOM (Audio CD) CD 1 Press the MODE button in stop mode. ¡The program setting menu screen will appear. 2 Press the MODE button again. RANDOM 30 seconds 12330 START : PLAY EXIT : MODE Notes ¡In the case of DVD, Time Search in Title is effective. Random playback (But Time Search in Chapter is ineffective. ) will then start. (But Time Search in the entire disc is ineffective. ) Note ¡Playback from a desired time count is not available ¡Program playback is not available during random with some discs or if the unit is in stop mode. ¡If wrong numbers are entered, press the CLEAR button and re-enter the correct numbers. MARKER DVD You can define the part to be called back. CD 1 Press the SEARCH MODE button three times during playback. Set the marker ¡Using the cursor (s/ B) button, position the cursor on to the marker number shown as "NOT SET". Up to 5 points can be marked. 1 2 3 4 5 AC NOT SET Call back the marker ¡Using the cursor (s/ B) button, position the cursor on to the marker number to be called back and press the ENTER button. Clear the marker ¡Using the cursor (s/ B) button, position the cursor on to the marker number to be cleared and press the CLEAR button. To clear all markers, place the cursor on "AC" (All clear markers) and press the ENTER button. 2 Press the SEARCH MODE button or the RETURN button to exit the display. ­ 16 ­ EN 1L25 REPEAT DVD 1 Press the REPEAT button. CD A-B REPEAT DVD CD You can define a section to be played back repeatedly. For DVDs ¡A single title or chapter is played back repeatedly. ¡Pressing the REPEAT button cycles the display on 1 Press the A-B REPEAT button during playback. ¡The starting point (A) will then be REPEAT [A- ] the screen as follows. REPEAT [OFF] selected. No repeat playback. 2 Press the A-B REPEAT button again at the REPEAT [CHAPTER] The current Chapter is played back repeatedly. The current Title is played back repeatedly. end point (B) of the desired section. ¡The selected section will be REPEAT [TITLE] played back repeatedly. REPEAT [A-B] For audio CDs ¡The whole disc or a single track is played back 3 To exit A-B repeat playback, press the A-B REPEAT button and set it to OFF. REPEAT [ OFF ] repeatedly. ¡Pressing the REPEAT button cycles the display on the screen through Off, Track and All. REPEAT [OFF] No repeat playback. Notes ¡With DVDs, the A-B repeat section can be set only REPEAT [TRACK] The current Track is played back repeatedly. The whole Disc is played back repeatedly. within the current title. ¡With audio CDs, the A-B repeat section can be set REPEAT [ALL] within the current track. ¡A-B repeat is not available with some scenes in DVD. ¡To cancel the A point which was set, press the CLEAR button. If the REPEAT button is pressed once during program/random playback, the current track is played back repeatedly. If the REPEAT button is pressed again, the program/random playback is performed repeatedly. ¡The REPEAT setting will be cleared when moving ¡A-B repeat playback is not function during title, chapter, track or all repeat playback had set. to other title, chapter or track. ¡Repeat playback is not function during A-B repeat playback. ­ 17 ­ EN 1L25 PROGRAM (Audio CD) CD 1 Press the MODE button in stop mode. ¡The program screen will appear. ZOOM PLAYBACK (enlargement on-screen) DVD Images can be enlarged on the screen to your taste. 1 Press the ZOOM button during playback. PROGRAM TIME 0:00:00 1/1 ¡An image will be enlarged at the center of the -- screen. ¡Pressing the ZOOM button cycles the zooming DELETE: CLEAR EXIT: RETURN START: PLAY RANDOM: MODE images in two steps. ZOOM [x2] ZOOM [x4] ZOOM [OFF] 2 Press the numeric buttons to enter the desired track numbers. [. . . ] Conectando el reproductor a un descodificador Dolby Digital o DTS, usted podrá disfrutar de un ambiente más convincente y real, con un sonido ambiental potente y de alta calidad de estándar profesional como el que puede oírse en los cines. Para hacer las conexiones de audio utilice cables digitales coaxiales de audio (de venta en el comercio). Consulte la figura 4 de la página 11 REPRODUCCIÓN DE UN DISCO REPRODUCCIÓN DE UN DVD DE VÍDEO O UN CD DE AUDIO DVD Para empezar Conecte la alimentación del televisor, amplificador y cualquier otro componente que esté conectado al reproductor DVD. (Cambie el sistema de entrada para adaptarlo al reproductor DVD, y compruebe que el volumen del sonido sea correcto. ) 3 Ponga un disco en la bandeja. ¡Asegúrese de que el disco esté correctamente asen- CD tado en el hueco correcto, con el lado de la etiqueta hacia arriba. 4 4 Pulse el botón PLAY. [. . . ]