User manual EMERSON EWC19D1

[. . . ] OWNER'S MANUAL "EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP. , PARSIPPANY, NEW JERSEY, U. S. A. " 19-INCH COLOR TV/DVD EWC19D1 SUPPLIED ACCESSORIES ACCESSORIES PART NO. 2 AA Batteries Remote Control Unit N0289UD INSTRUCCIONES EN ESPAÑOL INCLUIDAS. Batteries If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1- 800 - 256 - 2487 Please read before using this equipment. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. [. . . ] Playback conditions are preset on some DVD video discs, and these playback conditions take priority over user operations on this player. If a function you selected do not run as desired, refer to the manual accompanying the disc. Audio CD 12 cm Sound 8 cm (singles) This player conforms to the NTSC color system. You cannot play discs recorded in other color systems such as PAL or SECAM. ¡Some discs include region codes as shown below. Example Title 1 Title 2 Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2 ¡The number inside the symbol refers to a region of the world, and a disc encoded in a specific region format can only be played back on DVD players with the same region code. The following discs cannot be played back on this DVD player. ¡DVD with region codes other than 1 or ALL. ¡DVD-ROM ¡DVD-RAM (Never play back, otherwise mal- [AUDIO CD] Data on an audio CD is divided into sections called "tracks", each of which is given a track number. Example Track 1 Track 2 Track 3 Track 4 Track 5 Track 6 function may result. ) ¡CD-ROM ¡VSD ¡CDV (Only plays back the audio part. ) ¡CD-G (Only plays back the sound. ) ¡CD-R (Never play back, otherwise malfunction may result. ) ¡CD-I (Never play back, otherwise malfunction may result. ) ­ 20 ­ EN 0C28 PLAYING A DISC PLAYING A DVD VIDEO OR AN AUDIO CD DVD Getting started Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct. ) Notes ¡When the DVD mode has been switched to the TV CD 1 Press the POWER button. 2 Press the OPEN/CLOSE button. ¡The disc loading tray will open. mode, the DVD mode shut down first and then TV picture and sound appears in about 4 seconds. Similarly, when the POWER button is pressed off in the DVD mode, this mode shut down first and then the set's power is turned off. ¡A "prohibited icon" may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc. ¡If a disc is dirty or has scratches, the pictures may 3 Place a disc into the tray. ¡Make sure the disc is sitting properly in the correct appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback. ¡With DVDs that use some titles for playback recess, with the label side up. program signals, playback may start from the second title, or it may skip these titles. USING THE DVD MENUS DVD 4 Press the PLAY button. ¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button. ¡When you play back the DVD which a title menu is Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings. 1 Press the DISC MENU button. ¡The DVD menu will appear. recorded, the menu may appear on the screen. In this case, refer to "USING THE TITLE MENU". 2 Select the desired title. ¡Press the arrow buttons (L/K/B/s) to change the 5 Press the STOP button to stop play. setting, and then press the ENTER button. 3 Playback will start from the selected title. ­ 21 ­ EN 0C28 USING THE TITLE MENU DVD With a DVD containing a title menu, you can select desired titles from the menu. RESUMING PLAYBACK FROM THE POINT WHERE PLAYBACK STOPPED DVD CD 1 Press the STOP button during playback. ¡Playback will stop, and then appear the resuming message at the center. Press 'PLAY' to play from here To play beginning, press 'STOP' first and the 'PLAY'. 2 Select the desired title. ¡Press the arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button. 2 Press the PLAY button. Playback will start from the point where the previous playback session was stopped. Play B CALLING UP A MENU SCREEN DURING PLAYBACK Notes For DVDs ¡Press the DISC MENU button to call up the DVD ¡Resuming playback is not available with some discs. ¡If you switch to the TV mode during DVD playback, menu. ¡Press the TITLE button to call up the title menu. the resuming ¡It is possible to switch from the DVD play mode to Note ¡Contents of menus and corresponding menu the TV mode. Even if the power is turned off, the resume function enables to playback on from the previously interrupted point. But note that the Marker commands are not saved. PAUSING PLAYBACK OR DISPLAYING A STILL PICTURE DVD CD operations may vary between discs. Refer to the ¡The resume function can be reset by pressing the manual accompanying the disc for details. STOP button twice or by opening the disc loading tray. STEPPING THROUGH FRAMES DVD 1 Press the PAUSE button while playback is paused. ¡The next picture frame is disPause F 1 Press the PAUSE button during playback. ¡Playback will pause, with sound Pause F muted. played with sound muted each time the button is pressed. 2 Press the PLAY button to resume playback. Play B 2 Press the PLAY button to resume playback. Play B ­ 22 ­ EN 0C28 FAST FORWARD/REVERSE DVD CD 1 Press the numeric buttons to enter the desired track number. ¡The selected track will be located, and playback will start. 1 Press the FWD g or REV h button during playback. [. . . ] NOTA: La visualización volverá a la pantalla en unos 10 segundos. Realice la función "AÑADIR/BORRAR" mientras aparece la visualización en la pantalla. Pulse el botón de flecha B o s para encender el número de canal en AZUL CLARO si usted desea añadir el canal a la memoria. Pulse el botón de flecha B o s para encender el número de canal en ROJO CLARO si usted desea borrar el canal a la memoria. CD 1 Pulse el botón POWER. [. . . ]