User manual ELK PRODUCTS ELK-MA290

[. . . ] Proximity/iButton Reader Interface Magic Module Series ELK-MA290 The Proximity/iButton Reader Interface allows the ELK-MM443(s) Magic Module to accept Proximity Readers (26 bit Wiegand format) or Dallas iButtonTM touchkeys APPLICATION The Proximity/iButton Reader Interface can be used with one or two Proximity Readers (26 bit Wiegand output), one or two iButton Touchkey probes, or one of each. This enables the Magic Module to be used as an economical access controller for one to two doors, or for a single door with anti-passback or time-attendance functions. The Proximity/iButton Reader Interface connects to the Magic Module through an 8 conductor modular cable(included). [. . . ] Returned Products must include a complete description of the problem, along with the RA number clearly marked on outside of the package. Manufacturer will not be responsible for any unnecessary items included with any returned Product. MANUFACTURER SPECIFICALLY DISCLAIMS ANY AND ALL OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR OF MERCHANTABILITY. MANUFACTURER SHALL NOT BE LIABLE IN TORT, INCLUDING NEGLIGENCE OR STRICT LIABILITY, AND SHALL HAVE NO LIABILITY AT ALL FOR INJURY TO PERSONS OR PROPERTY. MANUFACTURER'S LIABILITY FOR FAILURE TO FULFILL ITS OBLIGATION UNDER THIS LIMITED WARRANTY OR ANY OTHER LIABILITY IN CONNECTION WITH A PRODUCT SHALL BE LIMITED TO THE AMOUNT OF THE PURCHASE PRICE RECEIVED BY MANUFACTURER FOR THE PRODUCT. THE REMEDIES STATED IN THIS LIMITED WARRANTY ARE THE CUSTOMER'S EXCLUSIVE REMEDIES AGAINST MANUFACTURER REGARDING ANY PRODUCT. UNDER NO CIRCUMSTANCES SHALL MANUFACTURER BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS AND REVENUES, INCONVENIENCE OR INTERRUPTIONS IN OPERATIONS, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSSES OF ANY KIND. THESE LIMITATIONS AND DISCLAIMERS ARE NOT MADE BY MANUFACTURER WHERE PROHIBITED BY LAW. SOME STATES PROHIBIT LIMITATIONS OF WARRANTIES AND THE CUSTOMER MAY HAVE ADDITIONAL RIGHTS IN THOSE STATES. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Connect the Quick Connect Data Cable from the J5 jack on the MM443(s) to the J1 jack on the Reader Interface. Note: When using the Reader Interface, a PSC05 X-10 power line interface module can not be connected to the ELK-MM443(s). When properly programmed and power applied, the unique serial number can be read by the ELK-MM443(s) just by holding a Wiegand prox card near the Wiegand reader or by touching the metal part of the iButton key to the iButton reader probe. Table 1 Reader 1 input type Proximity Proximity Dallas iButton Dallas iButton Reader 2 input type Proximity Dallas iButton Proximity Dallas iButton JP1 JP2 Reader Type Table 2 Reader Terminal Wiring Neg Wiegand Wiegand Dallas Dallas Wiegand Proximity Dallas Dallas iButton Wiegand Dallas Black Neg Black White data1 Grey Green data0 Red +12vdc D1 D0 +12V ELK-MM443(S) MAGIC MODULE POWER J3 J1 D PROXIMITY/iBUTTON READER INTERFACE (ELK-MA290) W JP2 READER 2 D W JP1 READER 1 iBUTTON READER and WALLPLATE (ELK-MA110) PROXIMITY READER 26bit Wiegand Format J5 REFER TO THE READER'S INSTALLATION MANUAL FOR PROPER MOUNTING PROCEDURES K3 K3 K4 Eight (8) Wire Modular Cord ELK-MA290 PROXIMITY/iBUTTON READER INTERFACE NEG D1 DALLAS READER 2 DALLAS WIEGAND D0 +12V NEG D1 DALLAS READER 1 DALLAS WIEGAND D0 +12V GREY Wire(probe) BLACK Wire(neg) RED Wire(+12v) COM NC NO COM NC NO COM NC ELAY 3 RELAY 3 RELAY 4 GREEN Wire(data0) WHITE Wire(data1) BLACK Wire(neg) [. . . ]