User manual ELK PRODUCTS ELK-870 V.1

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ELK PRODUCTS ELK-870 V.1. We hope that this ELK PRODUCTS ELK-870 V.1 user guide will be useful to you.


ELK PRODUCTS ELK-870 V.1 : Download the complete user guide (22 Ko)

Manual abstract: user guide ELK PRODUCTS ELK-870 V.1

Detailed instructions for use are in the User's Guide.

[. . . ] "Echo" Interior Self Amplified Speaker ELK-870 APPLICATION The ELK-870 is a self amplified interior speaker which may be connected to virtually any audio source, ie: microphone, radio, computer sound card, telephone PBX or KEY system paging output, etc. , even an ordinary single line phone set. The audio source is amplified up to 10 watts, adjustable from an onboard volume control. The ELK-870 features a reverse mounted, high quality internal speaker that effectively echos the sound off the surrounding mounting surface. [. . . ] ie: microphone, radio, computer sound card, telephone PBX or KEY system paging output, etc. , even an ordinary single line phone set (see diagram below). With Jumper JP1 set in the NO PREAMP position the ELK-870 is setup for an audio signal of -15 dbm to + 10 dbm. This jumper may be placed in the PREAMP position to provide +18dbm addition gain for weak audio input signals Internal speaker already connected. The ELK-870 speaker output can handle up to a maximum load of two (2) Ohms. Up to three (3) additional 8 Ohm speakers (MIN = 20 Watt (ELK-70, ELK-14, ELK-1. . . ) may be connected in parallel on these two terminals. SPKR: Recommended ELK-870 Spacing For Background Paging Applications Ambient Sound Level Quiet 50 to 65db Moderate 65 to 80db Noisy 80 to 90db Very Noisy +90cb VOLUME: PREAMP: Location Offices Light manufacturing Heavy manufacturing Speaker Spacing 120 feet (14, 400 sq. If the audio input signal is too low for proper amplification, place Jumper JP1 into the PREAMP position for an additional audio input gain of +18 dbm (8 X gain). Audio Source 12 to 24 Volts Microphone, Radio, PC Sound Card, Telephone System Paging Output AC or DC No Polarity PWR IN 12 to 24 Volts DC ONLY AUDIO IN - + 1, 000 Ohm 1/2 Watt Resistor Built-In 20 Watt Speaker MIN VOLUME MAX PWR IN AUDIO IN DO NOT CONNECT TO TELCO LINES GREEN RED ELK-870 Audio Amp PC Board SPKR EXAMPLE 1: BASIC PUBLIC ADDRESS "PA" SYSTEM (using the ELK-870 and a plain Telephone) OPTIONAL Up to three (3) additional 8 Ohm speakers may be connected in parallel Min. rating = 20 watt IE: ELK-70, ELK-14, ELK-1, ELK-44. . . FIGURE 1: WIRING HOOKUP LIFETIME LIMITED WARRANTY Elk Products, Inc. ("Manufacturer") warrants to the original purchaser (the "Customer") that the products it manufactures ("Product") shall be free from defects in material and workmanship at time of shipment. Manufacturer's obligations under this Limited Warranty shall be limited to repairing or replacing, at its option, free of charge, any product returned to Manufacturer freight prepaid. Manufacturer shall have no obligation under this Limited Warranty or otherwise if (1) the Product has been damaged by negligence, accident, mishandling, lightning or flood, or other Acts of God, (2) the Product has not been operated in accordance with its operating instructions, (3) the Product has been altered or repaired by anyone outside Manufacturer's authorized facilities (4) adaptations or accessories have been made or attached to the Product which, in Manufacturer's sole determination, have adversely affected its performance, safety or reliability. Products such as batteries and fused transformers have their own warranties, and are not included in this Limited Warranty. If a Product should malfunction or fail, contact Manufacturer or one of its authorized distributors for a Return Authorization (RA) number. Returned Products must include a complete description of the problem, along with the RA number clearly marked on outside of the package. [. . . ] SOME STATES PROHIBIT LIMITATIONS OF WARRANTIES AND THE CUSTOMER MAY HAVE ADDITIONAL RIGHTS IN THOSE STATES. For more information contact your local Distributor or: ELK Products, Inc. 70 West - Hildebran, NC, - 28637 - USA - 828-397-4200 PRE NO AMP PRE JP1 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ELK PRODUCTS ELK-870 V.1




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELK PRODUCTS ELK-870 V.1 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.