User manual ELECTROLUX CIL63443

[. . . ] You've chosen a product that brings with it decades of professional experience and innovation. So whenever you use it, you can be safe in the knowledge that you'll get great results every time. Get usage advice, brochures, trouble shooter, service and repair information: www. Buy Accessories, Consumables and Original spare parts for your appliance: www. [. . . ] Comes on and the cooking zone deactivates automatically after 2 minutes. The relation between the heat setting and the time after which the hob deactivates: The hob deactivates after 6 hours 5 hours 4 hours 1. Touch the control bar at the correct heat setting or move your finger along the control bar until you reach the correct heat setting. Induction cooking zones adapt to the dimension of the bottom of the cookware automatically. You can cook with large cookware placed on two cooking zones at the same time. cookware must cover the centres of both zones but not go beyond the area marking. If the cookware is located between the two centres, Bridge function will not be activated. CountUp Timer You can use this function to monitor how long the cooking zone operates. To set the cooking zone: touch repeatedly until the indicator of a cooking zone appears. When the indicator of the cooking zone starts to flash, the time counts up. To see how long the cooking zone operates: touch to set the cooking zone. Minute Minder You can use this function when the hob is activated and the cooking zones do not operate. To activate the function: touch and then touch or of the timer to set the time. This function sets all cooking zones that operate to the lowest heat setting. When the function operates, all other symbols on the control panels are locked. To override the function for only one cooking time: activate the hob with . - the sounds are on To confirm your selection wait until the hob deactivates automatically. When the function is set to you can hear the sounds only when: Count Down Timer comes down · You put something on the control panel. If multiple zones are active and the consumed power exceeds the limitation of the power supply, this function divides the available power between all cooking zones. The hob controls heat settings to protect the fuses of the house installation. If the hob reaches the limit of maximum available power (refer to the rating plate), the power of the cooking zones will be automatically reduced. The heat setting of the cooking zone selected last is always prioritised. [. . . ] Remove immediately: melted plastic, plastic foil, sugar and food with sugar, Otherwise, the dirt can cause damage to the hob. Use a special hob scraper on the glass surface at an acute angle and move the blade on the surface. Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a cloth. [. . . ]