User manual ELECTRO-VOICE XLE181 DATASHEET

[. . . ] Electrovoice http://www. electrovoice. com/products/20. html XLE181 Products Markets Press Room Downloads Contact Search The XLE181 is a 2-way design using the same 8" neodymium LF/MB transducer as the XLD281 and the same dual ND2S HF driver combination with a 120° x 10° waveguide coverage. [. . . ] That allows to either use the XS212 above or below arrays of XLD281 or, if vertical space is limited to be flown behind the full range array. Depending on music style and taste the ratio of XLD to XS212 is 3 or 4 to 1. Ground stacked one XS212 has the same heights as two XLD281 which is convenient for transportation. EV® is one of the very few loudspeaker manufacturers that has a long experience, heritage and capability for designing and building their own transducers. Forced-Air-Voice-Coil-Cooling provides very low power compression for very high SPL capability, low distortion and reliability. CP3000S Electro-Voice's new Precision Series Compact amplifiers offer proven Precision Series performance and reliability in a new compact, lightweight format. This is made possible by incorporating a highly efficient Class-H design, which results in considerably less heat being generated. This allows the overall size of the amplifier to be reduced substantially without sacrificing performance or reliability. The flagship of EV's Precision Series Compact amplifiers, the CP3000S is not only the first Precision Series amplifier to use a switch-mode power supply, but also the first switch-mode amplifier with EV's Precision Series sound. [. . . ] Blue Microphones | DYNACORD | Electro-Voice | IRISnet | Klark Teknik | Midas | Telex 2 of 2 6/14/06 3:39 PM [. . . ]