User manual ELECTRO-VOICE EVID 4.2 DATASHEET

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ELECTRO-VOICE EVID 4.2. We hope that this ELECTRO-VOICE EVID 4.2 user guide will be useful to you.


ELECTRO-VOICE EVID 4.2 DATASHEET: Download the complete user guide (178 Ko)

Manual abstract: user guide ELECTRO-VOICE EVID 4.2DATASHEET

Detailed instructions for use are in the User's Guide.

[. . . ] Model 4. 2 Compact Full-Range Speaker Key Features: · · · · · · · · · · · Line-array enhanced coverage control Organic, unobtrusive shape Strong-Arm-MountTM for easy, flexible aiming Full-bandwidth overload protection Weather resistant - Conforms to Mil Spec 810 and IEC 529 IP 34 Dual LF transducers for extended bass and greater power handling and output Ti direct-radiator HF transducer, Neodymium structure High sensitivity Magnetically shielded Zinc-plated grilles Transformer Versions Technical Specifications: Frequency Response 1(-10 dB) Power Handling Sensitivity 3 2 65Hz - 20kHz 200W Cont. [. . . ] Transformer versions are also available for constant voltage systems. 120° 80° 2. 2 kHz 2 x 4" (100 mm) 1" (25 mm) Full System Meets Mil Spec 810 humidity, salt spray, temperature and UV, and IEC 529 IP 34 splashproof ratings 100° x 90° Phoenix Connector ABS (paintable) 70V: 3. 75 W 70V/100V: 7. 5W, 15W, 30W, 8 ohm bypass 12. 2" x 6. 9" x 8. 5" (234 mm x 127 mm x 165 mm) 8. 5 lbs (3. 9 kg) 19 lbs (8. 6 kg) SAMTM, hex key Weather Resistance Swing x Rotation Terminals Enclosure Material "t" Version Wattage Taps Dim (H x W x D) Net Weight (each) Shipping Weight (pair) Included Accessories 1 2 Half Space (wall mounting) Continuous Program Rating: 3 dB greater than continuous pink noise rating (IEC-shaped pink noise with 6dB crest factor) 3 Avg: Half Space (wall mounting) 4 When mounted with long axis in vertical plane Architecture & Engineering Specs: The loudspeaker shall be a two-way system consisting of two 4" (102mm) low-frequency transducers, 1" (25mm) high-frequency transducer with a Coherent Coverage Waveguide, and frequency-dividing network installed in a vented, line array enclosure. The network shall include a passive limiter for both the low frequency and high frequency transducers. The loudspeaker system shall meet the following performance criteria: Power handling, 200 watts of EIA RS-426A continuous pink noise (6 dB crest factor); Frequency response, 65 Hz ­ 20 kHz (-10 dB from rated sensitivity); Pressure sensitivity, 89 dB at one watt, 200 Hz ­ 10 kHz at one meter; Impedance, 8 ohms nominal, 6 ohms minimum. The high frequency transducer shall drive a waveguide to evenly cover 120° horizontally by 80° vertically. The enclosure shall be 12. 2" (310mm) high, 6. 9" (175mm) wide, 8. 5" (216mm) deep. The grille shall be zinc plated, powder coated for corrosion resistance, and restrained with a safety leash. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 887-9212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www. electrovoice. com © Telex Communications, Inc. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE EVID 4.2




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE EVID 4.2 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.