User manual ELECTRO-VOICE DH2T-8 DATASHEET

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ELECTRO-VOICE DH2T-8. We hope that this ELECTRO-VOICE DH2T-8 user guide will be useful to you.


ELECTRO-VOICE DH2T-8 DATASHEET: Download the complete user guide (259 Ko)

Manual abstract: user guide ELECTRO-VOICE DH2T-8DATASHEET

Detailed instructions for use are in the User's Guide.

[. . . ] DH2T-8/DH2T-16 2-Inch High Frequency Transducer Key Features: · · · · · Pure titanium dome provides extended high frequency response Lightweight aluminum voice coil for maximum efficiency Unique convex-drive phase plug 1-3/8" screw on connection Available in 8 and 16 ohms General Description: The Electro-Voice DH2T high frequency compression driver is capable of high acoustic output over a wide frequency range. [. . . ] Recommended Crossover : 800 Hz or Higher Nominal Efficiency: 25% Sound Pressure Level2 : 114 dB, HP420 Horn (1 Watt @ 1 Meter) 112 dB, HP640 Horn 110 dB, HP940 Horn Throat Diameter : 1" (25mm) Voice Coil Diameter : 2" (50 mm) Voice Coil Wire: Pure Aluminum Wire Diaphragm Construction: 0. 03 mm Pure Titanium Dome and Surround Electrical Connection: One 0. 2" (+ Terminal) and one 0. 25" (- Terminal) Fast-on Connectors Polarity: Positive Voltage to Positive Terminal Produces a Positive Acoustic Pressure Flux Density: 1. 6 Tesla Net Weight (each): 5. 5 lbs (2. 5 kg) Shipping Weight: 6. 5 lbs (3. 0 kg) 1 Power capacity per AES standard. Continuous pink noise, 800 - 8000 Hz with a 6 dB crest factor, 2 hours. 2 Sound Pressure measured on axis in the far field with 1 Watt input of band-limited pink noise from 500 - 5000 Hz and calculated to 1 Meter equivalent by inverse square law. General Description (Cont'): Pure aluminum rectangular voice coil wire is used to obtain the highest sensitivity. Proprietary bonding and winding technologies assure unsurpassed reliability and performance of all DH2T diaphragm assemblies. Electro-Voice's commitment to precision compression driver manufacturing and modern design techniques assure the DH2T user the highest level of audio and engineering excellence. Frequency Response (On a Tube): Note: Frequency response and impedance of the DH2T-16 driver attatched to a 25mm (1. 0") diameter plane wave tube, using one watt input (4 Vrms). Dimension Drawings: Frequency Response (On an HP64M Horn): Top View Note: Frequency response and impedance of the DH2T-16 driver attached to an HP64M Horn, measured on axis in the far field using one watt input (4 Vrms). SPL calculated to 1 meter equivalent by inverse square law. Dimension Drawings (Cont'): Side View Side View (Shown with Optional ADH-3 Adapter) Bottom View Accessories: · ADH-3 Adapter (For 1. 38" Exit) 588-587 588-2855 Side View (Shown with Optional ADH-5 Adapter) (must be purchased separately) · ADH-5 Adapter (For 2. 0" Exit) (must be purchased separately) DH2T-8 Part Number: 834-PA-2680 DH2T-16 Part Number: 834-PA-3391 U. S. A. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 887-9212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www. electrovoice. com © Telex Communications, Inc. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE DH2T-8




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE DH2T-8 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.