User manual ELECTRO-VOICE AT300 DATASHEET

[. . . ] Attach rubber bumpers to enclosure as shown in illustration. Speaker Bracket Step 2: Attach wall bracket to wall using appropriate hardware (not supplied). [. . . ] Attach rubber bumpers to enclosure as shown in illustration. Speaker Bracket Step 2: Attach wall bracket to wall using appropriate hardware (not supplied). Note: It is the installers responsibility to choose and use fasteners correct for the wall construction on site. Screws Step 3: Slide enclosure (with speaker bracket attached) over wall bracket. Rubber Bumpers Wall Bracket This guide provides instruction on how to install the SL10-2V surround speaker to a wall. Correct use of appropriate hardware is required for secure installation. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. [. . . ] For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. [. . . ]