User manual EIZO FLEXSCAN S2411W

[. . . ] PRECAUTIONS Chapter 1 Features and Overview 1-1 Features 1-2 Switches and Indicators 1-3 Functions and Basic Operation Chapter 2 Settings and Adjustments 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment 2-4 Off Timer/Power Saving Settings 2-5 Screen Size Selection 2-6 Power Indicator/EIZO Logo Display Setting 2-7 Beeper Settings 2-8 Locking Switches 2-9 Setting Adjustment Menu Display 2-10 Viewing Information/Setting Language 2-11 Resumption of Default Setting Important Please read this User's Manual and Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage. Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor 3-2 Connecting Peripheral USB Devices Chapter 4 Troubleshooting Chapter 5 Reference 5-1 Attaching an Arm 5-2 Cleaning 5-3 Specifications 5-4 Glossary 5-5 Preset Timing How to Setup Please read the Setup Manual (separate volume) SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates a mandatory action that must be followed. Copyright© 2006-2007 EIZO NANAO CORPORATION All rights reserved. [. . . ] This function serves to reduce afterimages caused when the monitor screen is left on for a long time period without use. [Off Timer System] Timer ON time (1H - 23H) "ON time" expired Monitor Operating Notice*1 Power Off Power Indicator Blue Flashing blue Off · The Off Timer functions even in the power saving mode, but the advance notice is disabled. The monitor power is turned off without advance notice. Last 15 min. in "ON time" Advance *1 When is touched during the advance notice period, the monitor continues to operate for additional 90 minutes. Extension of operation time can be set without limitation. [Procedure] (1) Choose <Others> from the Adjustment menu, and touch (2) Choose <Off Timer> from the <Others> menu, and touch The <Off Timer> menu appears. . (4) Set a monitor ON time (1 to 23 hours) with The Off Timer setting is completed. or , and touch . [Resumption Procedure] (1) Touch . Chapter 2 Settings and Adjustments 17 To set monitor power-saving [VESA DPMS/DVI DMPM] Analog input This monitor complies with the VESA DPMS standard. [Power Saving System] PC Operating Power saving STAND-BY SUSPENDED OFF Monitor Operating Power saving Power Indicator Blue Orange Attention [Procedure] (1) Choose <PowerManager> from the Adjustment menu, and touch The <Set> menu appears. · Unplugging the power cord completely shuts off power supply to the monitor. · USB compliant devices connected to the monitor work even if the monitor is in the power saving mode. Therefore, power consumption of the monitor varies with connected devices even in the power saving mode. . (2) Select "VESA DPMS" with or , and touch . The power saving setting is completed. [Resumption Procedure] · Operate the mouse or keyboard to resume the normal screen. Digital input This monitor complies with the DVI DMPM standard. [Power Saving System] The monitor enters the power saving mode in five seconds in connection with the PC setting. PC Operating Power saving Monitor Operating Power saving Power Indicator Blue Orange [Procedure] (1) Choose <PowerManager> from the Adjustment menu, and touch The <Set> menu appears. . (2) Select "DVI DMPM" with or , and touch . The power saving setting is completed. [Resumption Procedure] · Operate the mouse or keyboard to resume the normal screen. 18 Chapter 2 Settings and Adjustments 2-5 Screen Size Selection To change screen size [Screen Size] The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using <Screen size> from <Others> menu. Menu Function Displays an image in full screen. Images are distorted in Full (default setting) some cases because the vertical rate is not equal to the horizontal rate. In some cases, a blank horizontal or vertical border appears to equalize the vertical rate and the horizontal rate. Displays images with the specified resolution. Example: Image size 1280 x 1024 Full (Default setting) Enlarged Normal (1920 x 1200) (1500×1200) (1280×1024) [Procedure] (1) Choose <Others> from the Adjustment menu, and touch (2) Choose <Screen Size> from the <Others> menu, and touch The screen size setting window appears. . . (3) Select "Full, " "Enlarged, " or "Normal" with The screen size setting is completed. or , and touch To adjust brightness of non-display area [Border Intensity] A border (black area with no image) around the image appears in the "Normal" or "Enlarged" mode. Border (1) Choose <Others> from the Adjustment menu, and touch . (2) Choose <Border Intensity> from the <Others> menu, and touch The <Border Intensity> menu appears. . (3) Adjust border intensity with or , and touch . The border intensity adjustment is completed. Chapter 2 Settings and Adjustments 19 2-6 Power Indicator/EIZO Logo Display Setting NOTE To turn off the Power indicator while a screen is displayed [Power Indicator] This function enables to turn off the Power indicator (blue) while a screen is displayed. (2) Choose <Power Indicator> from the <Others> menu, and touch The <Power Indicator> menu appears. · The Power indicator lights up at power on with the default setting. . (3) Select "Disable" with or , and touch . NOTE The Power Indicator setting is completed. To display EIZO logo [EIZO Logo Appearing Function] When this unit is turned on, the EIZO logo appears at the center of the screen. Selection to display or not to display the logo is available with this function. (2) Touch again while touching · The logo appears with the default setting. . The EIZO logo does not appear on the screen. [Resetting] (1) Touch to power off the unit. (2) Touch again while touching The logo appears again. . 2-7 Beeper Settings To set the beeper [Beep] Set the beeper on/off for operation tone of the switches, connection error, etc. Sound type Short beep Conditions for beeping · When an item is selected with · When a maximum or minimum value is set with the control switches · When is touched. · When · When registration is performed with · When the monitor is not connected correctly · When the PC is not turned on · When a frequency out of the specified range is received · 15 minutes before the power off time set by "Off Timer" (advance notice time) Long beep Consecutive beeps Beep-beep once every 15 seconds (1) Choose <Others> from the Adjustment menu, and touch (2) Choose <Beep> from the <Others> menu, and touch . The <beep> menu appears. . (3) Select On or Off with or , and touch . The beep setting is completed. 20 Chapter 2 Settings and Adjustments 2-8 Locking Switches To lock operation [Adjustment Lock] This function locks the switches to retain the status adjusted or set once. Switches that can be locked (Enter switch) Adjustments/settings using Adjustment menu · (Auto Adjustment switch) / · Switches that cannot · FineContrast mode selection/adjustment using be locked switches switches · Brightness adjustment using / (Input Signal Selection switch) · (1) Touch (2) Touch to turn off the unit. again while touching . The screen is displayed with the adjustment lock. [Unlocking] (1) Touch to turn off the unit. [. . . ] Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]