User manual EIZO FLEXSCAN S2100

[. . . ] PRECAUTIONS Chapter 1 Features and Overview 1-1 Features 1-2 Buttons and Indicators 1-3 Functions and Basic Operation Chapter 2 Settings and Adjustments 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment 2-4 Off Timer Settings 2-5 Screen Size Selection 2-6 Power Indicator/EIZO Logo Display Setting 2-7 Locking Buttons 2-8 Setting Adjustment menu Display 2-9 Viewing Information/Setting Language 2-10 Setting BrightRegulator 2-11 Resumption of Default Setting Important Please read this User's Manual and Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage. Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor 3-2 Connecting Peripheral USB Devices Chapter 4 Troubleshooting Chapter 5 Reference 5-1 Attaching an Arm (Option) 5-2 Cleaning 5-3 Specifications 5-4 Glossary 5-5 Preset Timing How to Setup Please read the Setup Manual (separate volume) SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2005 EIZO NANAO CORPORATION All rights reserved. [. . . ] [Off Timer System] Timer ON time (1H - 23H) "ON time" expired Monitor Operating Notice*1 Power Off Power Indicator Blue Flashing blue Off Attention Last 15 min. in "ON time" Advance *1 When is pressed during the advance notice period, the monitor continues to operate for additional 90 minutes. Extension of operation time can be set without limitation. · The Off Timer functions even in the power saving mode, but the advance notice is disabled. The monitor power is turned off without advance notice. [Procedure] (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Off Timer> from the <Others> menu, and press The <Off Timer> menu appears. . (4) Set a monitor ON time (1 to 23 hours) with The Off Timer setting is completed. or , and press . [Resumption Procedure] . Press 16 Chapter 2 Settings and Adjustments 2-5 Screen Size Selection To change screen size [Screen Size] This function allows you to change the screen size when a low-resolution image is displayed. Menu Function Displays an image in full screen. Images are distorted in Full (default setting) some cases because the vertical rate is not equal to the horizontal rate. In some cases, a blank horizontal or vertical border appears to equalize the vertical rate and the horizontal rate. Displays images with the specified resolution. Full (Default setting) Enlarged Normal Example: Image size 1280 × 1024 (1600×1200) (1500×1200) (1280×1024) [Procedure] (1) Choose <Others> from the Adjustment menu, and press . (2) Choose <Screen Size> from the <Others> menu, and press . The screen size setting window appears. (3) Select "Full, " "Enlarged, " or "Normal" with The screen size setting is completed. or , and press . To adjust brightness of non-display area [Border Intensity] A border (black area with no image) around the image appears in the "Normal" or "Enlarged" mode. Border (1) Choose <Others> from the Adjustment menu, and press . (2) Choose <Border Intensity> from the <Others> menu, and press The <Border Intensity> menu appears. . (3) Adjust border intensity with or , and press . The border intensity adjustment is completed. Chapter 2 Settings and Adjustments 17 2-6 Power Indicator/EIZO Logo Display Setting NOTE To turn off the Power indicator while a screen is displayed [Power Indicator Setting] This function enables to turn off the Power indicator (blue) while a screen is displayed. (2) Choose <Power Indicator> from the <Others> menu, and press The <Power Indicator> menu appears. · The logo appears with the default setting. . (3) Select "Disable" with or , and press . The Power Indicator setting is completed. To display EIZO logo [EIZO Logo Appearing Function] When this unit is turned on, the EIZO logo appears at the center of the screen. Selection to display or not to display the logo is available with this function. (2) Press again while pressing . The EIZO logo does not appear on the screen. [Resetting] (1) Press to power off the unit. (2) Press again while pressing The logo appears again. . 2-7 Locking Buttons To lock operation [Adjustment Lock] This function locks the buttons to retain the status adjusted or set once. Buttons that can be locked Buttons that cannot be locked (Enter button) Adjustments/settings using Adjustment menu (Auto adjustment button) · · · · · (Power button) (Input signal selection button) (Mode button) FineContrast mode name selection / (Control buttons) Brightness adjustment · [Procedure] (1) Press to turn off the unit. (2) Press again while pressing . The screen is displayed with the adjustment lock. [Unlocking] (1) Press to turn off the unit. (2) Press again while pressing . The screen is displayed with the adjustment lock released. 18 Chapter 2 Settings and Adjustments 2-8 Setting Adjustment menu Display To update menu settings [Menu Size/Menu Position/ Menu Off Timer/Translucent/Orientation] Menu Size Change the Adjustment menu size using the following procedure. (2) Choose <Menu Settings> from the <Others> menu, and press . (3) Choose <Menu Size> from the <Menu Settings> menu, and press The <Menu Size> menu appears. (4) Select "Enlarged" using or , and press . The menu size setting is completed. Menu Position Adjust the menu position using the following procedure. (2) Choose <Menu Settings> from the <Others> menu, and press . (3) Choose <Menu Position> from the <Menu Settings> menu, and press The <Menu Position> menu appears. . (4) Select a menu position with / / / , and press . The menu position setting is completed. Menu Off Timer Set the menu display time using the following procedure. (2) Choose <Menu Settings> from the <Others> menu, and press (3) Choose <Menu Off Timer> from the <Menu Settings> menu, and press . The <Menu Off Time> menu appears. NOTE · The display time of the FineContrast mode name remains unchanged. . (4) Choose "Enable" with or . [. . . ] Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (D-SUB mini 15 pin - D-SUB mini 15 pin, the enclesed signal cable) - Stereo mini-jack cable Canadian Notice This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada. 33 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. [. . . ]