User manual EIZO FLEXSCAN S2001W

[. . . ] PRECAUTIONS CONTENTS Chapter 1 Features and Overview 1-1 Features 1-2 Buttons and Indicators 1-3 Functions and Basic Operation Chapter 2 Settings and Adjustments 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment 2-4 Off Timer/Power Saving Settings Important Please read this User's Manual and Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage. 2-5 Screen Size Selection 2-6 Power Indicator/EIZO Logo Display Setting 2-7 Locking Buttons 2-8 Disabling DDC/CI Communication 2-9 Setting Adjustment Menu Display 2-10 Setting Orientation 2-11 Viewing Information/Setting Language 2-12 Setting BrightRegulator 2-13 Resumption of Default Setting Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor 3-2 Connecting Peripheral USB Devices Chapter 4 Troubleshooting Chapter 5 Reference 5-1 Attaching an Arm 5-2 Cleaning 5-3 Specifications 5-4 Glossary 5-5 Preset Timing How to Setup Please read the Setup Manual (separate volume) SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates a mandatory action that must be followed. Copyright© 2007 EIZO NANAO CORPORATION All rights reserved. [. . . ] You can change the screen size by using <Screen Size> from <Others> menu. Menu Full Screen (default setting) Enlarged Normal Function Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate. In some cases, a blank horizontal or vertical border appears to equalize the vertical rate and the horizontal rate. Displays images with the specified resolution. Full Screen (Default setting) Enlarged Normal Screen Size Selection Example: Image size 1280 × 1024 (1680 × 1050) (1312 × 1050) (1280 × 1024) [Procedure] (1) Choose <Others> from the Adjustment menu, and press . (2) Choose <Screen Size> from the <Others> menu, and press . The screen size setting window appears. (3) Select "Full Screen, " "Enlarged, " or "Normal" with press . The screen size setting is completed. or , and To adjust brightness of non-display area [Border Intensity] A border (black area with no image) around the image appears in the "Normal" or "Enlarged" mode. Border (1) Choose <Others> from the Adjustment menu, and press . (2) Choose <Border Intensity> from the <Others> menu, and press The <Border Intensity> menu appears. . (3) Adjust border intensity with or , and press . The border intensity adjustment is completed. 20 Chapter 2 Settings and Adjustments 2-6 To turn off the Power indicator while a screen is displayed [Power Indicator] This function enables to turn off the Power indicator (blue) while a screen is displayed. (2) Choose <Power Indicator> from the <Others> menu, and press The <Power Indicator> menu appears. Power Indicator/EIZO Logo Display Setting NOTE · The Power indicator lights up at power on with the default setting. . (3) Select "Disable" with or , and press . The Power Indicator setting is completed. To display EIZO logo [EIZO Logo Appearing Function] When this unit is turned on, the EIZO logo appears at the center of the screen. Selection to display or not to display the logo is available with this function. (1) Press again while pressing (2) Press NOTE · The logo appears with the default setting. . The EIZO logo does not appear on the screen. [Resetting] (1) Press to turn off the unit. (2) Press again while pressing The logo appears again. . 2-7 To lock operation [Adjustment Lock] This function locks the buttons to retain the status adjusted or set once. Buttons that can be locked Buttons that cannot be locked · · · · · · (Enter button) Adjustments/settings using Adjustment menu (Power button) (Mode button) FineContrast mode name selection (Input signal selection) (Volume control buttons) / (Control buttons) Brightness adjustment Locking Buttons (1) Press (2) Press to turn off the unit. again while pressing . The screen is displayed with the adjustment lock. [Unlocking] (1) Press to turn off the unit. (2) Press again while pressing . The screen is displayed with the adjustment lock released. Chapter 2 Settings and Adjustments 21 2-8 To disable DDC/CI communication [Procedure] (1) Press to turn off the unit. (2) Press again while pressing Disabling DDC/CI Communication . DDC/CI communication setting is disabled. [Resetting] (1) Press to turn off the unit. (2) Press again while pressing . DDC/CI communication setting is enabled. [Checking the setting status] (1) Select <Information> menu in the Adjustment menu and press The <Information> menu appears. . (2) Pressing continuously, the DDC/CI communication setting status is shown on the 2nd page of the information page. 2-9 To update menu settings [Menu Size/Menu Position/Menu Off Timer/Translucent] Menu Size Change the Adjustment menu size using the following procedure. (2) Choose <Menu Settings> from the <Others> menu, and press . (3) Choose <Menu Size> from the <Menu Settings> menu, and press The <Menu Size> menu appears. Setting Adjustment Menu Display . (4) Select "Enlarged" using or , and press . The menu size setting is completed. Menu Position Adjust the menu position using the following procedure. (2) Choose <Menu Settings> from the <Others> menu, and press . (3) Choose <Menu Position> from the <Menu Settings> menu, and press The <Menu Position> menu appears. . (4) Select a menu position with / / / , and press . The menu position setting is completed. Menu Off Timer Set the menu display time using the following procedure. (2) Choose <Menu Settings> from the <Others> menu, and press . (3) Choose <Menu Off Timer> from the <Menu Settings> menu, and press The <Menu Off Timer> menu appears. NOTE · The display time of the FineContrast mode remains unchanged. . (4) Select "Enable" with or . (5) Choose an Off Time (15/30/45/60 seconds) with The menu off timer setting is completed. or , and press . 22 Chapter 2 Settings and Adjustments Translucent Set the transparency for menu display using the following procedure. (2) Choose <Menu Settings> from the <Others> menu, and press . [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. [. . . ]