User manual EIZO FLEXSCAN S2000

[. . . ] PRECAUTIONS Chapter 1 Features and Overview 1-1 Features 1-2 Buttons and Indicators 1-3 Functions and Basic Operation Chapter 2 Settings and Adjustments 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment 2-4 Off Timer/Power Saving Settings 2-5 Screen Size Selection 2-6 Power Indicator/EIZO Logo Display Setting 2-7 Locking Buttons 2-8 Setting Adjustment Menu Display 2-9 Viewing Information/Setting Language 2-10 Resumption of Default Setting Important Please read this User's Manual and Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage. Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor Chapter 4 Troubleshooting Chapter 5 Reference 5-1 Attaching an Arm (Option) 5-2 Cleaning 5-3 Specifications 5-4 Glossary 5-5 Preset Timing How to Setup Please read the Setup Manual (separate volume SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates a mondatory action that must be followed. Copyright© 2006 EIZO NANAO CORPORATION All rights reserved. [. . . ] . (3) Adjust the selected item with The adjustment is completed. / / / , and press 16 Chapter 2 Settings and Adjustments 2-4 Off Timer/Power Saving Settings Attention To set monitor power-off time [Off Timer] This function allows the monitor to automatically turn off after a specified time has passed. This function serves to reduce afterimages caused when the monitor screen is left on for a long time period without use. [Off-timer operation flowchart and power indicator status] · The Off Timer functions even in the power saving mode, but the advance notice is disabled. The monitor power is turned off without advance notice. * ( ) shows the power indicator status. [Procedure] (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Off Timer> from the <Others> menu, and press The <Off Timer> menu appears. . (4) Set a monitor ON time (1 to 23 hours) with The Off Timer setting is completed. or , and press . [Resumption Procedure] (1) Press . Chapter 2 Settings and Adjustments 17 To set monitor power-saving [VESA DPMS/DVI DMPM] Analog input This monitor complies with the VESA DPMS standard. [Power Saving System] PC Operating Power saving STAND-BY SUSPENDED OFF Monitor Operating Power saving Power Indicator Blue Orange Attention [Procedure] (1) Choose <PowerManager> from the Adjustment menu, and press The <Set> menu appears. . · Unplugging the power cord completely shuts off power supply to the monitor. · USB compliant devices connected to the monitor work even if the monitor is in the power saving mode. Therefore, power consumption of the monitor varies with connected devices even in the power saving mode. (2) Select "VESA DPMS" with or , and press . The power saving setting is completed. [Resumption Procedure] (1) Operate the mouse or keyboard to resume the normal screen. Digital input This monitor complies with the DVI DMPM standard. [Power Saving System] The monitor enters the power saving mode in five seconds in connection with the PC setting. PC Operating Power saving Monitor Operating Power saving Power Indicator Blue Orange [Procedure] (1) Choose <PowerManager> from the Adjustment menu, and press The <Set> menu appears. . (2) Select "DVI DMPM" with or , and press . The power saving setting is completed. [Resumption Procedure] · Operate the mouse or keyboard to resume the normal screen from the PC's power saving mode. 18 Chapter 2 Settings and Adjustments 2-5 Screen Size Selection To change screen size [Screen Size] The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using <Screen size> from <Others> menu. Menu Function Displays an image in full screen. Images are distorted in Full (default setting) some cases because the vertical rate is not equal to the horizontal rate. In some cases, a blank horizontal or vertical border appears to equalize the vertical rate and the horizontal rate. Displays images with the specified resolution. Example: Image size 1280 × 1024 Full (Default setting) Enlarged Normal (1600×1200) (1500×1200) (1280×1024) [Procedure] (1) Choose <Others> from the Adjustment menu, and press . (2) Choose <Screen Size> from the <Others> menu, and press . The screen size setting window appears. (3) Select "Full, " "Enlarged, " or "Normal" with The screen size setting is completed. or , and press . To adjust brightness of non-display area [Border Intensity] A border (black area with no image) around the image appears in the "Normal" or "Enlarged" mode. Border (1) Choose <Others> from the Adjustment menu, and press . (2) Choose <Border Intensity> from the <Others> menu, and press The <Border Intensity> menu appears. . (3) Adjust border intensity with or , and press . The border intensity adjustment is completed. Chapter 2 Settings and Adjustments 19 2-6 Power Indicator/EIZO Logo Display Setting NOTE To turn off the Power indicator while a screen is displayed [Power Indicator Setting] This function enables to turn off the Power indicator (blue) while a screen is displayed. (2) Choose <Power Indicator> from the <Others> menu, and press The <Power Indicator> menu appears. · The Power indicator lights up at power on with the default setting. . (3) Select "Disable" with or , and press . NOTE The Power Indicator setting is completed. To display EIZO logo [EIZO Logo Appearing Function] When this unit is turned on, the EIZO logo appears at the center of the screen. Selection to display or not to display the logo is available with this function. (2) Press again while pressing · The logo appears with the default setting. . The EIZO logo does not appear on the screen. [Resetting] (1) Press to power off the unit. (2) Press again while pressing The logo appears again. . 2-7 Locking Buttons To lock operation [Adjustment Lock] This function locks the buttons to retain the status adjusted or set once. Buttons that can be locked Buttons that cannot be locked (Enter button) Adjustments/settings using Adjustment menu · (Auto Adjustment button) · / FineContrast mode selection/adjustment using control buttons · / Brightness adjustment using control buttons · (Input Signal Selection button) · (1) Press (2) Press to turn off the unit. again while pressing . The screen is displayed with the adjustment lock. [Unlocking] (1) Press to turn off the unit. (2) Press again while pressing . The screen is displayed with the adjustment lock released. 20 Chapter 2 Settings and Adjustments 2-8 Setting Adjustment Menu Display To update menu settings [Menu Size/Menu Position/Menu Off Timer/Translucent/Orientation] Menu Size Change the Adjustment menu size using the following procedure. (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Menu Settings> from the <Others> menu, and press . [. . . ] Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (D-sub mini 15-pin - D-sub mini 15-pin, the enclesed signal cable) Canadian Notice This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada. 35 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. [. . . ]