User manual EIZO FLEXSCAN S1721

[. . . ] PRECAUTIONS Chapter 1 Features and Overview 1-1 Features 1-2 Buttons and Indicators 1-3 Functions and Basic Operation Chapter 2 Settings and Adjustments 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment 2-4 Off Timer Settings 2-5 Power Indicator/EIZO Logo Display Setting 2-6 Locking Buttons 2-7 Setting Adjustment menu Display 2-8 Viewing Information/Setting Language 2-9 Setting BrightRegulator 2-10 Resumption of Default Setting Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor Chapter 4 Troubleshooting Chapter 5 Reference 5-1 Attaching an Arm (Option) 5-2 Power Saving Mode 5-3 Cleaning 5-4 Glossary 5-5 Preset Timing Important Please read this User's Manual, Setup Manual (separate volume) and Specifications Sheet carefully to familiarize yourself with safe and effective usage. How to Setup Please read the Setup Manual (separate volume) Specifications Please read the Specifications Sheet on the CD-ROM. SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates a mandatory action that must be followed. Copyright© 2006 EIZO NANAO CORPORATION All rights reserved. [. . . ] · Wait 20 minutes or more from monitor power on before starting the color adjustment. · Choose [Reset] from the Color menu to revert to the default setting (factory setting) of the color tone of the FineContrast mode selected. · The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics. Make fine color adjustment visually when matching colors on multiple monitors. · Adjustable functions vary depending on the type of FineContrast mode. "OFF, " "5000K, " "6500K, " or "9300K" · The values shown in the Kelvin (K) are available only as reference. · While color temperature is adjusted, <Gain> is adjusted automatically according to the color temperature. · When <Gain> is set, color temperature setting is disabled, and is set to "OFF". Gain To adjust red, green, and 0 to 100% blue to a desired color tone Adjust the respective brightness of respectively red/green/blue to make a desired color tone. Display an image with white or gray background for adjustment. NOTE · Values shown in percentage are available only as reference. Reset To reset the color settings of the selected FineContrast mode to the default settings. To set/adjust color (1) Choose <Color> from the Adjustment menu, and press . (2) Select a desired function from the <Color> menu, and press The selected function menu appears. . (3) Adjust the selected item with The adjustment is completed. or , and press . *1 :Speaker applied model *2 :Speaker non-applied model Chapter 2 Settings and Adjustments 15 2-4 Off Timer Settings Attention To set monitor power-off time [Off Timer] This function allows the monitor to automatically turn off after a specified time has passed. This function serves to reduce afterimages caused when the monitor screen is left on for a long time period without use. [Off Timer System] Timer ON time (1H - 23H) "ON time" expired *1 · The Off Timer functions even in the power saving mode, but the advance notice is disabled. The monitor power is turned off without advance notice. Monitor Operating Power Off Power Indicator Blue Flashing blue Off Last 15 min. in "ON time" Advance Notice*1 When is pressed during the advance notice period, the monitor continues to operate for additional 90 minutes. Extension of operation time can be set without limitation. [Procedure] (1) Choose <Others> from the Adjustment menu, and press . (2) Choose <Off Timer> from the <Others> menu, and press The <Off Timer> menu appears. . (3) Select "Enable" with or , and press (4) Set a monitor ON time (1 to 23 hours) with The Off Timer setting is completed. . or , and press . [Resumption Procedure] Press . 2-5 Power Indicator/EIZO Logo Display Setting NOTE To turn off the Power indicator while a screen is displayed [Power Indicator Setting] This function enables to turn off the Power indicator (blue) while a screen is displayed. (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Power Indicator> from the <Others> menu, and press The <Power Indicator> menu appears. · The Power indicator lights up at power on with the default setting. . (3) Select "Disable" with or , and press . The Power Indicator setting is completed. To display EIZO logo [EIZO Logo Hiding Function] When this unit is turned on, the EIZO logo appears at the center of the screen. Selection to display or not to display the logo is available with this function. again while pressing . NOTE · The logo appears with the default setting. The EIZO logo does not appear on the screen. [Resetting] (1) Press (2) Press to power off the unit. again while pressing . The logo appears again. 16 Chapter 2 Settings and Adjustments 2-6 Locking Buttons To lock operation [Adjustment Lock] This function locks the buttons to retain the status adjusted or set once. Buttons that can be locked Buttons that cannot be locked · · · · · (Enter button) Adjustments/settings using Adjustment menu (Power button) (Input signal selection button) (Volume control button) or control button)*1 (Brightness control button)*2 (Brightness [Procedure] (1) Press (2) Press to turn off the unit. [. . . ] Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (D-SUB mini 15 pin - D-SUB mini 15 pin, the enclosed signal cable) - Stereo mini-jack cable (Speaker applied model) Canadian Notice This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada. 27 Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. [. . . ]