User manual EIZO FLEXSCAN S1501

[. . . ] PRECAUTIONS CONTENTS Chapter 1 Features and Overview 1-1 Features 1-2 Buttons and Indicators 1-3 Functions and Basic Operation Chapter 2 Settings and Adjustments Important Please read this User's Manual and Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage. 2-1 Utility Disk 2-2 Screen Adjustment 2-3 Color Adjustment 2-4 Off Timer Settings 2-5 Power Indicator/EIZO Logo Display Settings 2-6 Locking Buttons 2-7 Disabling DDC/CI Communication 2-8 Setting Adjustment Menu Position 2-9 Viewing Information/Setting Language 2-10 Setting BrightRegulator 2-11 Resumption of Default Setting Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor Chapter 4 Troubleshooting Chapter 5 Reference 5-1 Attaching an Arm 5-2 Power Saving Mode 5-3 Cleaning 5-4 Specifications 5-5 Glossary 5-6 Preset Timing How to Setup Please read the Setup Manual (separate volume) SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates a mandatory action that must be followed. Copyright© 2007 EIZO NANAO CORPORATION All rights reserved. [. . . ] · The same image may be seen in different colors on multiple monitors due to their monitor-specific characteristics. Make fine color adjustment visually when matching colors on multiple monitors. Menu Brightness Description To adjust the full screen brightness as desired NOTE 0 to 100% NOTE · You can also adjust the brightness by pressing or button while the adjustment menu is not displayed. · The values shown in the "%" are available only as reference. Contrast To adjust the contrast of the 0 to 100% image NOTE · The Adjustment menu and the FineContrast mode cannot be displayed at the same time. · Adjustable functions vary depending on the type of FineContrast mode. · The values shown in the "%" are available only as reference. Temperature To select a color temperature NOTE 4000K to 10000K in units of 500K (including 9300K). · Setting the value to "Off" presents the natural color of the panel. · The values shown in the Kelvin (K) are available only as reference. Gamma Gain To set a gamma value 1. 8, 2. 0, 2. 2 To adjust red, green, and 0 to 100% blue to a desired color tone Adjust the respective brightness of respectively red/green/blue to make a desired color tone. Display an image with white or gray background for adjustment. NOTE · The values shown in the "%" are available only as reference. · When using the <Gain> setting, the <Temperature> setting is set to "Off". Reset To reset the color settings of the selected FineContrast mode to the default settings To set/adjust color (1) Choose <Color> from the Adjustment menu, and press . (2) Select a desired function from the <Color> menu, and press The selected function menu appears. . (3) Adjust the selected item with The adjustment is completed. or , and press . Chapter 2 Settings and Adjustments 15 2-4 Off Timer Settings Attention To set monitor power-off time [Off Timer] This function allows the monitor to automatically turn off after a specified time has passed. This function serves to reduce afterimages caused when the monitor screen is left on for a long time period without use. [Off Timer System] Timer ON time (1H - 23H) "ON time" expired Monitor Operating Power Off Power Indicator Blue Flashing blue Off · The Off Timer functions even in the power saving mode, but the advance notice is disabled. The monitor power is turned off without advance notice. Last 15 min. in "ON time" Advance Notice* * When is pressed during the advance notice period, the monitor continues to operate for additional 90 minutes. Extension of operation time can be set without limitation. [Procedure] (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Off Timer> from the <Others> menu, and press The <Off Timer> menu appears. . . (3) Select "Enable" with or , and press (4) Set a monitor ON time (1 to 23 hours) with The Off Timer setting is completed. . or , and press . [Resumption Procedure] · Press . 16 Chapter 2 Settings and Adjustments 2-5 Power Indicator/EIZO Logo Display Settings NOTE To turn off the Power indicator while a screen is displayed [Power Indicator] This function enables to turn off the Power indicator (blue) while a screen is displayed. (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Power Indicator> from the <Others> menu, and press The <Power Indicator> menu appears. · The Power indicator lights up at power on with the default setting. . (3) Select "Disable" with or , and press . The Power Indicator setting is completed. To display EIZO logo [EIZO Logo Appearing Function] When this unit is turned on, the EIZO logo appears at the center of the screen. Selection to display or not to display the logo is available with this function. again while pressing (2) Press NOTE · The logo appears with the default setting. . The EIZO logo does not appear on the screen. [Resetting] to power off the unit. [. . . ] · When interlace signals are used, the screen cannot be displayed correctly even after screen adjustment using the Adjustment menu. Chapter 5 Reference 29 Congratulations!The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment. [. . . ]