User manual EIZO FLEXSCAN L985EX

[. . . ] User's Manual Color LCD Monitor English SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2002-2003 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION. EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION's receipt of said information. [. . . ] ADJUSTMENT English 4. Adjust the output signal range (Dynamic Range) of the signal. Use the <Range Adjustment> (p. 45) of <Screen> menu. This controls the level of output signal range to display the whole color gradation (256 colors). [Procedure] Press the Auto Adjustment Button on the control panel while displaying the <Range Adjustment> menu to automatically adjust the range. The screen blanks for a moment and adjusts the color range to display the whole color gradation of the current output signal. Digital Input The monitor displays the digital input image correctly based on its pre-setting data. However, if the image position is not correct or larger than the actual image screen, please adjust the following adjustment items using the "Screen" menu of the ScreenManager. 1. The screen position is incorrect. Use the <Position> adjustment. See page 26. 2. Screen image is smaller or larger than the actual screen images. Displaying Low Resolutions The lower resolutions are enlarged to full screen automatically. Using the <Screen Size> function in the <Others> menu enables to change the screen size. 1. Enlarge the screen size when displaying a low resolution. Select the <Screen Size>. Select the <Screen Size> in the others menu and select the screen size by using the up and down buttons. Menu Full Function Displays the picture on the screen in full, irrespective of the picture's resolution. Since the vertical resolution and the horizontal resolution are enlarged at different rates, some images may appear distorted. Displays the picture on the screen in full, irrespective of the picture's resolution. Since the vertical resolution and horizontal resolution are enlarged at same rates, some horizontal or vertical image may disappear. Displays the picture at the actual Screen resolution. Enlarged Normal Example: Displaying 1280 x 1024 Full (Default Setting) Enlarged Normal (1600×1200) (1500×1200) (1280×1024) 2. Smooth the blurred texts of the enlarged screen. Switch the <Smoothing> setting. Select the suitable level from 1 ­ 5 (Soft ­ Sharp). Select <Smoothing> in the <Screen> menu and adjust by using the right and left buttons. NOTE · <Smoothing> is disabled when the screen is displayed in the following resolutions. *1600 x 1200 *The image size is doubled both in horizontally and vertically to (i. e. 1600 x 1200 enlarged from 800 x 600) provide clear focus which does not require this function. 28 4. ADJUSTMENT English 3. Set the brightness of the black area surrounding the displayed image. Set the <Border Intensity>. In the <Enlarge> mode or <Full Screen> mode, the outer area (border) is usually black. Select <Border Intensity> in the <Others> menu and adjust by using the right and left buttons. Border 4. Color Adjustment Color settings of each FineContrast mode can be adjusted and saved by using the <Color> menu of the ScreenManager. [. . . ] Lead damages the nervous system and in higher doses, causes lead poisoning. The relevant TCO'99 requirement permits the inclusion of lead since no replacement has yet been developed. * Bio-accumulative is defined as substances which accumulate within living organisms. ** Lead, Cadmium and Mercury are haevy metals which are Bio-accumulative. For U. S. A, Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. [. . . ]