User manual EIZO FLEXSCAN L797

[. . . ] User's Manual Color LCD Monitor English SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates to ground for safety. Copyright© 2004-2005 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION. [. . . ] Color Adjustment Color settings of each FineContrast mode can be adjusted and saved by using the <Color> menu of the ScreenManager. Select the mode in advance by using the FineContrast Mode. Adjustment items The adjustable items and displayed icons on the ScreenManager depend on the selected FineContrast mode. "": Settable/Adjustable "­": Fixed at the factory FineContrast Modes Icons Functions Text Brightness Temperature Gamma Saturation Hue Gain 6 colors Reset * * * ­ ­ Picture ­ ­ ­ Movie ­ ­ ­ Custom sRGB ­ ­ ­ ­ ­ ­ ­ External ­ ­ ­ ­ ­ ­ ­ * These settings can be also adjusted on the FineContrast menu. (p. 22) NOTE Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. (Allow the monitor to warm up for at least 20 minutes before making adjustments. ) Performing the <Reset> of the <Color> menu returns the color settings of the selected mode to the default settings. The values shown in percentages represent the current level within the specific adjustment. (To create a uniform white or black screen, the percentages for each will probably not be the same. ) 4. ADJUSTMENT 33 English Adjustment Contents 0 Menu Brightness Function Descriptions To set the brightness of the screen To set the color temperature 0 ~ 100 % Adjustable range Temperature (p. Default setting is off (normal white) NOTE The values shown in the Kelvin are available only as a reference tool. Setting the temperature under 4, 000 K or over 10, 000 K invalidates the color temperature setting. (The color temperature's setting turns "OFF". ) Gamma (p. 49) To set the gamma value 1. 8 ~ 2. 6 (in 0. 2 increments) NOTE If setting the gamma value, the using the monitor in the digital signal input is recommended. If using the monitor in the analog input signal, set the gamma value from 1. 8 to 2. 2. Saturation To change the saturation -16 ~ 16 Setting the minimum level (-16) turns the image to the monochrome. NOTE The <Saturation> adjustment may cause undisplayable color tone. -20 ~ 20 NOTE The <Hue> adjustment may cause undisplayable color tone. Gain To change each color (red, green and blue) 0 ~ 100% By adjusting the red, green and blue color tones for each mode, custom colors can be defined. Display a white or gray background image and adjust the <Gain>. NOTE The values shown in the percentage are available only as a reference tool. 6 colors To adjust <Saturation> and <Hue> in each color (Red, Yellow, Green, Cyan, Blue and Magenta) To return the color settings of the selected mode to the default settings Hue: -20 ~ 20 Saturation: -16 ~ 16 Reset Select the "Reset". 34 4. Power-save Setup The <PowerManager> menu in the ScreenManager enables to set the power-save setup. NOTE Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. Even if the monitor is in a power saving mode, USB compliant devices function when they are connected to the monitor's USB (both the upstream and the downstream ports). Therefore, power consumption of the monitor will change according to the connected devices even if the monitor is in a power saving mode. Analog Input This monitor complies with the <VESA DPMS> (p. 50) standard. To use the PC's Power Saving System (VESA DPMS ). [Procedure] (1) (2) Set the PC's power saving settings. [. . . ] Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord - Shielded Signal Cable (enclosed) Canadian Notice This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada. Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB 2000 mit dem Videosignal, 1280 Punkte × 1024 Zeilen, RGB analog, 0, 7 Vp-p und mindestens 75, 0 Hz Bildwiederholfrequenz, non interlaced. [. . . ]