User manual EIZO FLEXSCAN L788-I

[. . . ] (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 Trade name: EIZO Model: FlexScan L788 declare that the product is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Color mode can also be switched to other if pressing Mode button of the control panel. 26) before making the color adjustments. NOTE Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments. Performing the <Reset> of the <Color> menu returns the color settings of the selected mode to the default settings. The values shown in percentages represent the current level within the specific adjustment. (To create a uniform white or black screen, the percentages for each will probably not be the same. ) <Custom> Mode - customizing monitor color Adjustment Contents 0 Menu Brightness Function Descriptions To set the brightness of the screen 0 ~ 100 % Adjustable range NOTE The values shown in the percentage are available only as a reference tool. Contrast To adjust the screen gradation higher or lower 0 ~ 100 % NOTE The values shown in the percentage are available only as a reference tool. 4. 44) Function Descriptions To set the color temperature Adjustable range 4000 ~ 10000 K in 500 K increments (including 9300 K). NOTE Setting the value to "Off" presents the natural color temperature of the panel. The values shown in the Kelvin are available only as a reference tool. Setting the temperature under 4000 K or over 10000 K invalidates the color temperature setting. (The color temperature's setting turns "Off". ) Saturation To change the saturation -16 ~ 16 Setting the minimum level (-16) turns the image to the monochrome. NOTE Using <Saturation> adjustment may not obtain proper tone reproduction. -20 ~ 20 NOTE Using <Hue> adjustment may not obtain proper tone reproduction. Gain To change each color (red, green and blue) 0 ~ 100% By adjusting the red, green and blue color tones for each mode, custom colors can be defined. Display a white or gray background image and adjust the <Gain>. NOTE The values shown in the percentage are available only as a reference tool. Reset To return the color settings of the selected mode to the default settings Select the "Reset". <sRGB> Mode Adjustment Contents 0 Menu Brightness Function Descriptions To set the brightness of the screen 0 ~ 100 % Adjustable range 30 4. Power-save Setup The <PowerManager> menu in the ScreenManager enables to set the power-save setup. NOTE Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. Even if the monitor is in a power saving mode, USB compliant devices function when they are connected to the monitor's USB (both the upstream and the downstream ports). Therefore, power consumption of the monitor will change according to the connected devices even if the monitor is in a power saving mode. Analog Input This monitor complies with the <VESA DPMS> (p. 43), which works with a blank screen (totally black screen) like "Blank Screen" ScreenSaver software. To use the PC's Power Saving System (VESA DPMS ) [Procedure] (1) (2) Set the PC's power saving settings. Select "VESA DPMS" in the <PowerManager> menu. [Power Saving System] PC Operation Power saving STAND-BY SUSPEND OFF Power saving Yellow Monitor The screen is displayed Power Indicator Blue [Power Resumption Procedure] Operate the mouse or keyboard to return to a normal screen. 4. ADJUSTMENT 31 English To set the Power Save with ScreenSaver (EIZO MPMS) Software. [Procedure] (1) (2) Set the PC's appropriate ScreenSaver settings or blank the screen (totally black screen). Select "EIZO MPMS" in the <PowerManager> menu. [Power Saving System] PC Operation Blank the screen (ScreenSaver or Macintosh Energy Saver) Monitor The screen is displayed Power saving Power Indicator Blue Yellow [Power Resumption Procedure] Operate the mouse or keyboard to return to a normal screen. NOTE EIZO MPMS should be used with Macintosh "EnergySaver". Digital Input This monitor complies with the DVI DMPM (p. [. . . ] The relevant TCO'99 requirement states that batteries, the colour-generating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury** Mercury is sometimes found in batteries, relays and switches. The relevant TCO'99 requirement states that batteries may not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. [. . . ]