User manual EIZO FLEXSCAN L568 SETUP MANUAL

[. . . ] Important: Please read this Setup Manual and the User's Manual stored on the CDROM carefully to familiarize yourself with safe and effective usage. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. [. . . ] nOTE · Please keep the packaging box and materials for future movement or transport of the monitor. 1 2 3 4 5 Input signal selection button Mode button Auto adjustment button Enter button Control buttons (Left, Down, Up, Right) Switches input signals for display when two PCs are connected to the monitor. Blue : Operating Flashing yellow (2 time for each) Yellow : Power saving Off Complies with Kensington's MicroSaver security system. (For how to use ScreenManager, refer to the User's Manual on the CD-ROM. When replacing the current monitor with an L568/L768 monitor, be sure to change the PC settings for resolution and vertical frequency to those which are available for the L568/L768 monitor referring to the resolution table (back of cover page) before connecting the PC. nOTE · When connecting two PCs to the monitor, refer to the User's Manual on the CD-ROM. Plug the power cord into a power outlet and the Power connector on the monitor. The monitor's Power indicator lights up blue and the screen image appears. The Auto Adjustment function is not necessary when digital signals are input because images are displayed correctly based on the preset data of the monitor. For the maximum power saving, it is recommended that the power button be turned off. [. . . ] When the image is displayed correctly after a short time, there is no problem with the monitor. Installationshandboken Beskriver grundinformation från anslutning av monitorn till en dator till När du byter ut en befintlig skärm mot L568/L768 skall du försäkra dig om att du ändrar datorns inställningar för upplösning och vertikal frekvens till de som är tillgängliga för L568/L768 genom att se till upplösningstabellen (baksidan av omslagssidan) innan du ansluter datorn. [. . . ]