User manual EIZO FLEXSCAN L461

[. . . ] ENGLISH ENGLISH SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2001 by EIZO NANAO CORPORATION. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of Eizo Nanao Corporation. [. . . ] Select the "Range Adjustment" in the "ColorManagement" menu. [Auto] Push the Auto adjustment button on the front panel while displaying the "Range adjustment" menu to automatically adjust the range. The screen blanks for a moment, and adjusts the color range to display the whole color gradation of the current output signal. · Pressing Auto adjustment button while displaying the contrast/brightness adjustment screen (appeared by pressing the control buttons directly) adjusts the range automatically. ENGLISH 5. To set the Contrast of the screen. Use the "Contrast" adjustment. This controls the brightness for the each color (red, blue and green) at a same time. Select "Contrast/Brightness" in the screen menu and adjust by using the right and left buttons. 6. To set the Brightness of the screen. Use the "Brightness" adjustment. This controls the brightness for the entire screen. The brightness of the entire screen is controlled by changing the brightness if the backlight. Select "Contrast/Brightness" in the screen menu and adjust by using the up and down buttons. · Directly pressing the control buttons also adjusts the contrast and brightness. Press the "Enter" button to save and exit the settings after the adjustment. 4. Displaying the low resolutions The lower resolutions are enlarged to full screen automatically. Using the "ScreenSize" function in the "Others" menu enables to change the screen size. 1. To enlarge the screen size when displaying a low resolution. Select "Screen Size" Select the "Screen Size" in the others menu and select the screen size by using the up and down buttons. · Full Displays the picture on the screen in full, irrespective of the picture's resolution. Since the vertical resolution and the horizontal resolution are enlarged at different rates, some images may appear distorted. Displays the picture on the screen in full, irrespective of the picture's resolution. Since the vertical resolution and horizontal resolution are enlarged at same rates, some horizontal or vertical image may disappear. Displays the picture at the actual Screen resolution. · Enlarged · Normal Example: Displaying 1024 x 768 Full Enlarged Normal 1280 x 1024 1280 x 960 1024 x 768 22 4. ADJUSTMENT 2. To be clear-cut the letters or lines of the enlarged screen. Switch the "Smoothing" setting. Select "Smoothing" in the screen menu and switch the setting to "Off" by using the left button. ENGLISH · "Smoothing" is disabled in the following cases. * 1280 x 1024 of resolution * "Enlarged" mode in "Screen Size" setting with the 1280 of the horizontal resolution (i. e. 1280 x 960) * "Normal" mode in the "Screen Size" setting 3. To set the brightness of the black area surrounding the image. [. . . ] Cadmium** Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. The relevant TCO'99 requirement states that batteries, the colour-generating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury** Mercury is sometimes found in batteries, relays and switches. The relevant TCO'99 requirement states that batteries may not contain any mercury. [. . . ]