User manual EIZO FLEXSCAN HD2441W

[. . . ] PRECAUTIONS Chapter 1 Features and Overview 1-1 Features 1-2 Names of Switches 1-3 Functions Chapter 2 Basic Operation 2-1 Operation Switch Usage 2-2 Menu Operation 2-3 Resumption of Default Settings 2-4 Locking Switches Important Please read this User's Manual and Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage. Chapter 3 Settings and Adjustment 3-1 Input Signal Switching 3-2 Screen Adjustment 3-3 Color Adjustment 3-4 Sound Adjustment 3-5 PinP (Picture in Picture) Display 3-6 Screen Size Changing 3-7 Off Timer Setting 3-8 Monitor Power-saving Mode Setting 3-9 Power Indicator/EIZO Logo Display Setting 3-10 Beeper Setting 3-11 Information Checking 3-12 Language Setting to be Displayed Chapter 4 Troubleshooting Chapter 5 Reference 5-1 Attaching an Arm 5-2 Cleaning 5-3 Specifications 5-4 Glossary 5-5 Preset Timing How to Setup Please read the Setup Manual (separate volume) SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates a mandatory action that must be followed. Copyright© 2007 EIZO NANAO CORPORATION All rights reserved. [. . . ] · The Main Window is not used for VIDEO input signal display and the Sub-Window is not used for PC input signal display. NOTE To return to the normal display mode (Single display) from PinP display mode [Procedure] (1) Choose the <PinP Settings> icon in the Setting menu and tap the slide bar. (2) Choose the <PinP> icon in the <PinP Settings> menu and tap the slide bar. The <PinP> menu appears. · Touching for approx. two seconds in PinP display mode also allows you to return to the single display mode. (3) Trace the slide bar left and right to select "Off" and tap the slide bar. The PinP display mode is canceled. 24 Chapter 3 Settings and Adjustment To switch the input signal for Main Window/Sub-Window [Procedure] (1) Touch . Attention The Input Selection menu appears. (2) Trace the slide bar left and right to select <Main Window>/<Sub-Window> and tap the slide bar. The Input Selection menu for <Main Window>/<Sub-Window> appears. (3) Trace the slide bar left and right to select the input signal and tap the slide bar. The input signal is changed. [Input selection for Main Window] Ex. : PC 1PC 2 for Main Window PC 1 PC 2 · The setting items of the Input Selection menu in PinP display mode is different from those in the single display mode. · When changing the Main Window input signal (PC input signal), [USB] setting should be changed. (Refer to page 15. ) VIDEO 1 VIDEO 1 PC 1 [Input selection for Sub-Window] Ex. ; VIDEO 1VIDEO 2 for SubWindow PC 1 VIDEO 1 VIDEO 2 To hide the Sub-Window display with its sound being heard [Sub-Window Off] In PinP display mode, this function allows you to hide the Sub-Window display with its sound heard. If you want to show the PC screen display temporarily, this function is available. [Procedure] (1) Touch . The Input Selection menu appears. (2) Trace the slide bar left and right to select "Sub-Window Off " and tap the slide bar. Only the Sub-Window display disappears temporarily. NOTE · Touch to display the SubWindow display again. Chapter 3 Settings and Adjustment 25 To change the Sub-Window position [Sub-Window Position] You can select the Sub-Window position either "Upper Left", "Upper Right", "Lower Left" and "Lower Right". Upper Left Upper Right Lower Left Lower Right [Procedure] (1) Choose the <PinP Settings> icon in the Setting menu and tap the slide bar. (2) Choose the <Sub-Window Position> icon in the <PinP Settings> menu and tap the slide bar. The <Sub-Window Position> menu appears. (3) Trace the slide bar left and right to select either "Upper Left", "Upper Right", "Lower Left" or "Lower Right" and tap the slide bar. The Sub-Window position setting is completed. To set the translucent level for Sub-Window [Translucent] In PinP display mode, the Sub-Window is available to set in translucent. [Procedure] (1) Choose the <PinP Settings> icon in the Setting menu and tap the slide bar. (2) Choose the <Translucent> icon in the <PinP Settings> menu and tap the slide bar. The <Translucent> menu appears. NOTE · If you set the translucent setting to "0", the Sub-Window is not transparent at all. "0": 0%, "1": 25%, "2": 50%, "3": 75%) (3) Trace the slide bar left and right to select either "0", "1", "2" and "3" and tap the slide bar. The translucent setting is completed. To select the Sub-Window display size [Sub-Window Size] The Sub-Window display size is automatically changed according to the aspect information from the input signal of an AV equipment (Auto Screen Size). However, the Sub-Window display size may be changed manually in the <SubWindow Size> menu. [Procedure] (1) Choose the <PinP Settings> icon in the Setting menu and tap the slide bar. (2) Select the <Sub-Window Size> icon in the <PinP Settings> menu and tap the slide bar. The <Sub-Window Size> menu appears. Attention · When using 1080i/720p/1080p input signal, the display size of the SubWindow display is fixed to 16:9. NOTE · If you do not want to change the SubWindow size automatically, set the <Auto Screen Size> in the <Monitor Settings> to "Disable". (3) Trace the slide bar left and right to select either "4:3" and "16:9", and tap the slide bar. The Sub-Window size setting is completed. 26 Chapter 3 Settings and Adjustment 3-6 Screen Size Changing To change the screen image/projected image size appearing on the screen [Screen Size] [PC Input Signal] If you set the resolution other than recommended resolution on the monitor, the monitor shows the image automatically enlarged on the whole screen. The <Screen Size> menu allows you to change the screen display size. Settings Full Screen Status Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate. In some cases, a blank horizontal or vertical border appears to equalize the vertical rate and the horizontal rate. Displays images with the specified resolution. Enlarged Normal Ex. : 1280 × 1024 display Full Screen (default setting) Enlarged Normal (1920 × 1200) (1500 × 1200) (1280 × 1024) [Procedure] (1) Choose the <Screen Size> icon in the Setting menu and tap the slide bar. The <Screen Size> menu appears. (2) Trace the slide bar left and right to select either "Full Screen", "Enlarged", or "Normal" and tap the slide bar. The screen size setting is completed. [VIDEO Input Signal] The screen display size is automatically changed according to the aspect information from the input signal of an AV equipment (Auto Screen Size). However, the screen size may be changed manually in the <Screen Size> menu. Settings 4:3 Status Displays the image in 4:3 size. 16:9 sized images from the input signal are compressed horizontally and spread vertically. The black borders on the upper and lower sides of the image are cut and the images are displayed on the whole screen. Except for Letterbox, the upper and lower parts of the projected image are cut. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. [. . . ]