User manual EIZO ECLIENT SX1

[. . . ] User's Manual Stand Type Windows-based Terminal Contact your system administrator for details such as settings of the unit. English SAFETY SYMBOLS This manual uses the safety symbols below. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2004 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION. [. . . ] · Do your part to conserve energy, turn off the unit when your finished using it. Complete energy use can only be stopped by disconnecting the unit from the power supply. Power Supply Control Switch (POWER SYNC) When the monitor's power cord is connected to the AC output power supply of SC1/SX1, the monitor's power supply can be linked with on/off of SC1/SX1. Choose ON from the power supply control switch (POWER SYNC). When the power button of SC1/SX1 is turned on or off. . . Power Supply Control Switch (POWER SYNC) ON OFF (default) Power supply for the monitor The monitor's power supply is linked, and it turns on or off simultaneously. Since the monitor's power supply is not linked, please turn the monitor's power supply on or off independently. 2. How to control (SC1) Logging on or off the WTS (SC1) Logging on to the WTS 1. The "Terminal Connection Manager" dialog box will be displayed. Please follow the instruction depending on the network environment of the SC1. The "Terminal Connection Manager" dialog box will be displayed. If it's connected through a dial-up, click the active button on the right bottom of the screen. Click the button to disconnect the dial-up connection. 2. Follow the step 2 of "If your SC1 starts its operation with a desktop" to shut down the SC1. NOTE · It is possible to disconnect from the WTS without closing any applications in use (or without logging off). (The last view of the application is displayed when the next connection to the WTS is made. ) 2. OPERATION 15 English Opening/Closing the Local Web Browser Opening the Local Web Browser 1. The "Terminal Connection Manager" dialog box will be displayed. Please follow the instruction depending on the network environment of the SC1. (Contact your system administrator for the connection environment. ) (1) If the web server is on the same network (Intranet): Go to step 3. (2) If the web server is not on the same network, and dial-up connection is needed (Internet): Click the active button on the right bottom of the screen. Click the button to connect through a dial-up. Check the clock is running, and go on to step 3. 3. Click the [Connections] tab. Select [Web connection] and click [Connect] (or simply double click [Web connection]). 4. 16 The local web browser opens. It is possible to browse web pages on the internet. 2. OPERATION English Closing the Local Web Browser (SC1) 1. Close the local web browser. Select [Close] on the [File] and close the local web browser. The "Terminal Connection Manager" dialog box will be displayed. If a dial-up connection is made, click the active button on the right bottom of the screen. Click the button to disconnect the dial-up connection. 2. Shut down the SC1. There are 3 ways to shut down the unit. · Click [Shut down] at the "Terminal Connection Manager" dialog box (or press the power button). The unit will shut down automatically. NOTE · It is possible to disconnect from the local web server without closing the browser. 2. How to control (SX1) Logging on or off the WTS (SX1) Logging on to the WTS 1. The Desktop screen will be displayed. When using the RDP protocol, proceed to step 3, and when using the ICA protocol, proceed to step 4. 3. When using the RDP protocol In case the connection icon exists on the desktop (1) Double click the connection icon (The example below is "RDP1". ). 18 2. OPERATION English In case the connection name doesn't exist on the desktop (1) Double click the [Remote Desktop Connection] icon to open the [Remote Desktop Connection] dialog box. [. . . ] EIZO AND EIZO AUTHORIZED DISTRIBUTORS MAKE NO FURTHER WARRANTIES, EXPRESSED OR IMPLIED, WITH RESPECT TO THE PRODUCT AND ITS QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR USE. IN NO EVENT SHALL EIZO OR EIZO AUTHORIZED DISTRIBUTORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER DAMAGE WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFIT, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT OR IN ANY CONNECTION WITH THE PRODUCT, WHETHER BASED ON CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN IF EIZO OR EIZO AUTHORIZED DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS EXCLUSION ALSO INCLUDES ANY LIABILITY WHICH MAY ARISE OUT OF THIRD PARTY CLAIMS AGAINST THE ORIGINAL PURCHASER. THE ESSENCE OF THE PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF EIZO AND EIZO AUTHORIZED DISTRIBUTORS ARISING OUT OF THIS LIMITED WARRANTY AND/OR SALES. LIMITED WARRANTY i For U. S. A, Canada, etc. [. . . ]