User manual EIZO COLOREDGE CX240-BK

[. . . ] Important Please read PRECAUTIONS, this User’s Manual, and the Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. € Please refer to the Setup Guide for basic information ranging from connection of the monitor to a PC to using the monitor. € The latest User’s Manual is available for download from our web site: http://www. CX240 This product has been adjusted specifically for use in the region to which it was originally shipped. [. . . ] € The setting is required when a DVI device is connected to the monitor (at the HDMI connector port) using the DVIHDMI conversion connector. € Even if “Auto” is set, correct color might not be displayed. Note • The color space at the DVI input is converted to an RGB format. Choose “HDMI Settings” from “Screen”, and press 3. Press Attention The small noises that occur in dark images are reduced. € For interlace signals, the setting value can be changed but this function does not work. chapter 2 Adjusting Screens 31 Chapter 3 Setting Monitor 3-1. Enabling/Disabling Mode Selection Allows you to select the specified modes only. Use this function when all the display modes are not available or when keeping the display mode unchanged. Choose “Mode Preset” from “Tools”, and press 3. Select “On” or “Off” with • You cannot set all the modes disable. Selecting the Language This function allows you to select a language for the Adjustment menu and messages. selectable languages English/German/French/Spanish/Italian/Swedish/Japanese/Simplified Chinese/Traditional Chinese Procedure 1. Choose “Menu Settings” from the Adjustment menu, and press 2. Choose “Language” from “Menu Settings”, and press 3. Setting Orientation This function allows you to change the orientation of the Adjustment menu. Choose “Menu Settings” from the Adjustment menu, and press 2. Choose “Orientation” from “Menu Settings”, and press 3. When selecting “Portrait”, turn the monitor screen 90˚ in clockwise direction. € Be sure to turn the monitor screen after pulling up the screen to the uppermost position of the stand and setting the screen tilted upward. Note • For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When placing the monitor in a “Portrait” position, settings of your graphics board need to be changed. [. . . ] The projected image, sound and control signal without compressed enable to be transmitted with one cable. Overdrive This technology enhances response speed by increasing the potential difference at the time of motion of liquid-crystal pixels, and it is used for liquid-crystal TV sets and others in general. It provides clear-cut three-dimensional display with little afterimage, by improving response speed of the intermediate graduation range that frequently appears in moving images. Resolution The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. [. . . ]