User manual EIZO COLOREDGE CG301W

[. . . ] Important Please read this User's Manual carefully to familiarize yourself with safe and effective usage. SAFETY SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Utility Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To set the color temperature 4000K~10000K in 500 K increments (including 9300 K) Tips · The values shown in the Kelvin are available only as a reference tool. · While color temperature is adjusted, <Gain> is adjusted automatically according to the color temperature. · Setting the temperature under 4000 K or over 10000 K invalidates the color temperature setting. (The color temperature's setting turns "OFF". ) Gamma · Setting the <Gain> invalidates the <Temperature> adjustment. To set the gamma value 1. 8~2. 6 Saturation To change the saturation -100~100 Setting the minimum level (-100) turns the image to the monochrome. NOTE Hue · The <Saturation> adjustment may cause undisplayable color tone. -100~100 NOTE Gain · Using <Hue> adjustment may not obtain proper tone reproduction. To change each color 0~100% (red, green and blue) By adjusting the red, green and blue color tones for each mode, custom colors can be defined. Display a white or gray background image and adjust the <Gain>. Tips · The values shown in the "%" are available only as reference. To adjust <Saturation> and <Hue> in Hue: -100 ~ 100 each color (Red, Yellow, Green, Cyan, Saturation: -100 ~ 100 Blue and Magenta) To reset the color settings of the selected FineContrast mode to the default settings. 6 colors Reset 1 3. Power-save Setup The <PowerManager> menu in the ScreenManager enables to set the power-save setup. NOTE · Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. · Even if the monitor is in a power saving mode, USB compliant devices function when they are connected to the monitor's USB (both the upstream and the downstream ports). Therefore, power consumption of the monitor will change according to the connected devices even if the monitor is in a power saving mode. This monitor complies with the "DVI DMPM" [Procedure] 1. Select "DVI DMPM" from the <PowerManager> menu. [Power Saving System] The monitor enters the power saving mode in five seconds in connection with the PC setting. PC Operation Power saving Monitor Operation Power saving Power Indicator Blue Orange [Power Resumption Procedure] Operate the mouse or keyboard to return to a normal screen. 1 3. Off Timer The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed. This function was created to reduce Afterimage characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use. [Procedure] 1. Select "Enable" and touch the Right and Left directing switches to adjust the operating time (1 to 23 hours). in operating time Operating time expired *1 Monitor Operation Advance Notice *1 Power Off Power Indicator Blue Blue Flashing Off When is pressed during the advance notice period, the monitor continues to operate for additional 90 minutes. Extension of operation time can be set without limitation. [Power Resumption Procedure] Press NOTE · The off timer function works while the PowerManager is active, but there is no advance notice before the monitor's power is turned off. Locking the Settings Use the "Adjustment Lock" function to prevent any accidental changes. Buttons that can be locked · · · Buttons that cannot be locked · · (Enter button) / Adjustments/settings using Adjustment menu (Mode button) + Display setup (P. 11) (Input Signal Selection button) (Power button) [How to lock] 1. [. . . ] Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]