User manual EIZO COLOREDGE CG303W

[. . . ] Important Please read PRECAUTIONS, this User's Manual and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. ·Please read the Setup Guide (separate volume) ·The latest User's Manual is available for download from our site: http://www. eizo. com [Location of the Caution Statements] Product specifications may vary with sales areas. Confirm the specifications in the manual written in the language of the region of purchase. This product has acquired TCO standard that relates to safety, ergonomics, environment and so forth of office equipment. [. . . ] ·Restarting the PC ·Connecting the PC and peripherals directly ·If the problem is solved by doing this, contact an EIZO dealer. · Check that the PC and OS are USB compliant (For verificationofUSBsupport, consultthemanufacturerof each system). · Check the PC's BIOS setting for USB (For details, refer to the manual of the PC). 14. USB function cannot be setup. 24 5. Attaching an Arm The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD monitor. NOTE · When attaching an arm or stand, follow the instructions of their user's manual. · When using another manufacturer's arm or stand, confirm the following in advance and select one conforming to the VESA standard. - Clearance between the screw holes: 100 mm × 100 mm - Thickness of plate: 2. 6 mm - Strong enough to support weight of the monitor unit (except the stand) and attachments such as cables. - The screws fixing the stand to the monitor · When using an arm or stand, attach it to meet the following tilt angles of the monitor. - Up 45 degrees, down 45 degrees (horizontal display, and vertical display rotated 90 degrees clockwise) · Connect the cables after attaching an arm. · Do not adjust the height of the stand removed from the monitor. When adjusted without attached monitor, it causes the personnel injury or the damaged to the stand. · Since the monitor and arm are so heavy, dropping them may result in injury or equipment damage. Setup Procedure 1 2 3 Lay the LCD monitor on a soft cloth spread over on a stable surface with the panel surface facing down. Remove the stand. Unscrew the four screws securing the unit and the stand with the screwdriver. Attach the monitor to the arm or stand. Use the screws that hold the monitor and stand together for installation. 25 5. Specifications LCD Panel 75. 6 cm (29. 8 inch), TFT color LCD panel Surface treatment : Anti-Glare Hard Coating Surface hardness : 3H Response Time : 12ms Horizontal : 178°, Vertical : 178°(CR: 10 or more) 0. 2505mm 269 MHz 26~100 kHz 29. 5 - 30. 5Hz, 59 - 61Hz (VGA TEXT: 69 ~ 71 Hz) 2560 dots x 1600 lines 16. 77 million colors (max. ) 120cd/m2 or less (with color temperature of between 5000K to 6500K) 641. 3 mm (H) × 400. 8 mm (V) (25. 2" (H) x 15. 8" (V)) 100-120 VAC±10%, 50/60 Hz, 1. 8A 200-240 VAC±10%, 50/60 Hz, 0. 8A Viewing Angle Dot Pitch Dot Clock (Max. ) Horizontal Scan Frequency Vertical Scan Frequency Resolution Display Colors Recommended Brightness Display Area Power Supply Power Consumption Screen Display On 170 W (with USB) 160 W (without USB) Power Saving Less than 1. 5 W (for single signal input without USB) Mode Power switch Off 1W or less Input Signal Connector SIGNAL 1:DVI-D, Dual Link SIGNAL 2:DVI-D, Single Link (HDCP compliant) Input Signal (Digital) Signal registration Plug & Play Dimensions with stand without stand with hood Weight with stand without stand with hood Temperature Humidity Pressure USB standard USB port Communication Speed TMDS 10 VESA DDC 2B / EDID structure 1. 3 689 mm (W) x 511. 5 ~ 629. 5 mm (H) x 254. 7 mm (D) (27. 1"(W) x 20. 1" ~ 24. 8" (H) x 10"(D)) 689 mm (W) x 450 mm (H) x 90 mm (D) (27. 1"(W) x 17. 7" (H) x 3. 54"(D)) 699 mm (W) x 520 ~ 638 mm (H) x 406. 5 mm (D) (27. 5"(W) x 20. 5" ~ 25. 1" (H) x 16"(D)) 16. 1 kg (35. 5 lbs. ) 11. 6 kg (25. 6 lbs. ) 17. 4 kg (38. 4 lbs. ) Operating : 0°C ~ 35°C (32°F ~ 95°F) Storage : -20°C ~ 60°C (-4°F ~ 140°F) Operating : 20% to 80% R. H. USBSpecificationRevision 2. 0 Upstream port x 1 Downstream port x 2 480 Mbps (high), 12 Mbps (full), 1. 5 Mbps (low) Downstream: 500 mA for each (max. ) Environment Conditions Power Supply 26 5. Reference Dimensions mm (inch) 628 (24. 7) 588 (23. 1) 240 (9. 4) 35° 35° SWIVEL 322. 8(12. 7) 405. 6(16) 689(27. 1) 643. 3(25. 3) 22. 9 347. 7(13. 7) TILT 1. 6 (0. 06) 1. 6 (0. 06) 1. 6 (0. 06) 51 (2. 01) 57 90 (2. 24) (3. 54) 138. 5(5. 5) 40° 294. 5(11. 6) 100 (3. 9) 294. 5(11. 6) 402. 8(15. 9) 450(17. 7) 629. 5(24. 8) 118(4. 6) 1. 6 (0. 06) 9. 5(0. 37) 179. 5(7. 1) 61. 5 (2. 42) 254. 7(10) 265(10. 4) 170(6. 7) 699(27. 5) 118. 8(4. 7) 406. 5(16) 299(11. 8) 272(10. 7) 209(8. 2) 520638(20. 525. 1) 458. 1(18) 70. 5(2. 78) 254. 7(10) Default settings Brightness Smoothing Temperature FineContrast Mode PowerManager Screen Size Off Timer Menu Settings Menu Size Menu Off Timer Beep Language Display Setup Signal Selection 40% 3 5000K Custom DVI DMPM Full Disable Normal 45 seconds On English Single Display Dual Link 17 (0. 67) 404. 5(15. 9) 175(6. 9) 23. 6 (0. 93) 100 (3. 9) 175(6. 9) 23. 6 (0. 93) 27 5. Reference Pin Assignment ·DVI-D Connector 1234 5678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 SIGNAL1 : Applicable to DualLink Pin No. 1 2 3 4 5 6 7 8 Signal T. M. D. S. Data 4+ DDC Clock (SCL) DDC Data (SDA) NC* Pin No. 9 10 11 12 13 14 15 16 Signal T. M. D. S. Data 3+ +5V Power Ground (return for +5V, Hsync and Vsync) Hot Plug Detect Pin No. 17 18 19 20 21 22 23 24 Signal T. M. D. S. Clock- (*NC: No Connection) SIGNAL2 : Applicable to SingleLink only Pin No. 1 2 3 4 5 6 7 8 Signal T. M. D. S. Data2/4 Shield NC* NC* DDC Clock (SCL) DDC Data (SDA) NC* Pin No. 9 10 11 12 13 14 15 16 Signal T. M. D. S. Data1/3 Shield NC* NC* +5V Power Ground (return for +5V, Hsync and Vsync) Hot Plug Detect Pin No. 17 18 19 20 21 22 23 24 Signal T. M. D. S. Clock- (*NC: No Connection) ·USB Port Upstream Downstream Series B Connector Series A Connector No. 1 2 3 4 Signal VCC - Data + Data Ground Remarks Cable power Serial data Serial data Cable Ground 28 5. [. . . ] EIZO och Distributörer kommer att upphöra med lagerhållning av Produktens delar efter sju (7) år efter att produktionen av dessa delar upphört. Nät skärmen repareras använder EIZO och distributörer reservdelar som uppfyller våra kvalitetsstandarder. Garantin är endast giltig i de länder där det finns Distributörer. Garantin begränsar inte några av den Ursprunglige köparens lagstadgade rättigheter. [. . . ]