User manual EIZO COLOREDGE CG243W

[. . . ] Important Please read PRECAUTIONS, this User's Manual and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. · Please read the Setup Guide (separate volume) · The latest User's Manual is available for download from our site: http://www. eizo. com [Location of Caution Statement] Ex. Confirm the specifications in the manual written in the language of the region of purchase. This product has acquired TCO standard that relates to safety, ergonomics, environment and so forth of office equipment. http://www. eizo. com Copyright© 2009 EIZO NANAO CORPORATION All rights reserved. [. . . ] Choose <Advanced Settings> from the <Color> menu, and press . Choose the color for adjustment among <Red>, <Green>, or <Blue> to adjust, and press Adjust the black level with or . Press to exit the adjustment. . NOTE · To further darken the black when the value of the black level is 0, lower the brightness value. · Lowering the contrast value will not change the brightness of the black level. Chapter 2 Adjusting Screen To adjust six colors [6 Colors] The hue and saturation can be adjusted for each of six colors: Magenta, Red, Yellow, Green, Cyan, and Blue. Choose <Advanced Settings> from the <Color> menu, and press . Choose the color for adjustment among <Magenta>, <Red>, <Yellow>, <Green>, <Cyan>, or <Blue>, and press . Displaying Lower Resolutions To change screen size [Screen Size] The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using <Screen Size> from <Screen> menu. Menu Full (default setting) Enlarged Normal Function Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate. In some cases, a blank horizontal or vertical border appears to equalize the vertical rate and the horizontal rate. Displays images with the specified resolution. Example: Image size 1280 x 1024 in case of CG243W Full (Default setting) Enlarged Normal (1920 x 1200) (1500 x 1200) (1280 x 1024) Procedure 1. Select "Full Screen, " "Enlarged, " or "Normal" with or . Configuringmovingimageperformance [Overdrive] (CGW) By using the <Overdrive> setting, the extent to which fast moving images produce visible afterimages can be reduced. This setting is set to "On" by default, but while turned "On" noise and afterimages may instead be more noticeable. In such a case, please set the <Overdrive> setting to "Off". Enabling/Disabling Mode Selection [Mode Preset] Allows you to select the specified modes only. Use this function when all the display modes are not available or when keeping the display mode unchanged. Select the mode to change its settings with or , and press Select "On" or "Off" with or . Press to exit the adjustment. . Attention · You cannot set all the modes disable. Locking Buttons [Key Lock] This function allows you to lock to prevent changing the adjusted/set status. Choose <Key Lock> from the <Optional Settings> menu, and press or , and press . Select "Off", "Menu", or "All" with Settings Off (Initial settings) Menu All Buttons that can be locked None (All buttons are enabled) button All buttons excluding . 5. [. . . ] Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]