User manual EIZO COLOREDGE CG232W

[. . . ] Important Please read PRECAUTIONS, this User's Manual and Setup Manual (separate volume) carefully to familiarize yourself with safe and effective usage. · How to Setup Please read the Setup Manual (separate volume) · The latest User's Manual is available for download from our site: http://www. eizo. com Product specifications may vary depending on the region. Confirm the specifications in the manual written in the language of the region of purchase. Copyright© 2008 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION. EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION's receipt of said information. [. . . ] (Allow the monitor to warm up for at least 30 minutes before making adjustments. ) · The values shown in percentages represent the current level within the specific adjustment. (To create a uniform white or black screen, the percentages for each will probably not be the same. ) 1 2. Adjusting Screen Adjustment Contents Menu Black Level Function Descriptions To adjust the black level as desired 0 - 32 Adjustable range Brightness To set the brightness of the screen 0~100% Tips Temperature · The values shown in the "%" are available only as reference. To set the color temperature 5000K~10000K in 500 K increments (including 5400K and 9300 K) Tips · The values shown in the Kelvin are available only as a reference tool. · While color temperature is adjusted, <Gain> is adjusted automatically according to the color temperature. · If the temperature is set below 5000 K or over 10000 K, the setting of <Temperature> is turned "Off". Gamma · If <Gain> is set, the setting of <Temperature> is turned "Off". To set the gamma value 1. 6 - 2. 7 Tips · If setting the gamma value, the using the monitor in the digital signal input is recommended. If using the monitor in the analog input signal, set the gamma value from 1. 8 to 2. 2. To change the saturation -100~100 Setting the minimum level (-100) turns the image to the monochrome. Saturation Note Hue · This function does not enable to display every color gradation. -100~100 Note Gain · This function does not enable to display every color gradation. To change each color 0~100% (red, green and blue) By adjusting the red, green and blue color tones for each mode, custom colors can be defined. Display a white or gray background image and adjust the <Gain>. Tips · The values shown in the "%" are available only as reference. The <Gain> setting varies with color temperature. Note Reset · This function does not enable to display every color gradation. Changing Screen Size Ratio The screen size ratio can be selected using the <Screen Size> function on the <Screen> menu. Changing Screen Size Ratio for Input Screen -> Select the <Screen Size>. Select the <Screen Size> in the <Screen> menu and select the screen size by using . When using DVI/D-SUB input signal Mode Enlarged and Function Displays the picture on the screen in full, irrespective of the picture's resolution. Since the vertical resolution and horizontal resolution are enlarged at same rates, some horizontal or vertical image may disappear. Displays the picture on the screen using the same resolution of the input signal. Enlarged (Default Setting) Normal Normal When using SDI input signal (input signal NTSC or PAL) Mode Dot by Dot 4:3 16:9 Letter Box Function Displays the picture on the screen using the same resolution of the input signal. Displays the input video expanded to a vertical resolution of 1080 while maintaining the aspect ratio to 4:3 (horizontal: vertical). Displays the input video expanded to a vertical resolution of 1080 while maintaining the aspect ratio to 16:9 (horizontal: vertical). [. . . ] (rated 100-120 Vac) Only This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will required to correct the interference at his own expense. [. . . ]