User manual EINHELL RT 350

[. . . ] When you are not using the grass trimmer, keep it in a dry place out of the reach of children. Use the grass trimmer only as described in these directions for use and always hold it vertical to the ground. Never use the grass trimmer if the power cable is in less than perfect condition. Power cables used with the trimmer must not be of a lighter duty class than HO7RN-F rubberinsulated flexible cables according to DIN 57282 11 Please read the directions for use carefully and observe the information provided. [. . . ] Examine the grass trimmer for signs of wear or damage each time before you use it and after any collisions. Always keep your hands and feet away from the cutting mechanism, particularly when you switch on the trimmer. After pulling out new line, always return the trimmer to normal working position before you switch it on again. Never use replacement parts or accessories which are not foreseen or recommended by the manufacturer. Pull out the power plug before carrying out any inspection, cleaning or other work on the trimmer and whenever it is not being used. The nylon line will run on for a few seconds after the tool is switched off!Voltage Power rating Cutting width Speed Nylon cutting line Sound pressure level LPA Sound power level Vibration aw Weight 230V ~ 50 Hz 350 W ø 25 cm 11, 000 rpm ø 1. In this case, noise protection measures need to be introduced for the user. The machine's noise was measured in accordance with IEC 59 CO 11, IEC 704, DIN 45635 Part 21, NFS 31-031 (84/538/EEC). This value was determined in compliance with EN 786 Appendix D: 1996+A1: 2001. To install the safety hood Place the safety hood on the motor head (Figure 4) and then turn it clockwise until it engages (Figure 5). The trimmer is designed for cutting lawns and small areas of grass in private and hobby gardens. Tools for private and hobby gardens are not suitable for use in public facilities, parks and sport centers, along roadways, on farms or in the forestry sector. For the tool to be used properly it is imperative to follow the instructions set out in the manufacturer's directions for use. It is prohibited to use the tool to chop material for composting because of the potential danger to persons and property. Item 1: Warning Item 2: Wear eye protection Item 3: Protect from moisture Item 4: Read the instruction manual before starting Item 5: Pull out the mains plug before checking a damaged power cable Item 6: Keep other people out of the danger area Item 7: The tool continues to rotate 12 You can adjust the height of the grass trimmer and the position of the auxiliary handle to obtain the optimal working position. You can adjust its height to suit your own height by undoing Push the button (Figure 11 Item 1) in the direction indicated by the arrow and pull the handle off the telescopic tube. Turn the handle through 180° and slide it back into the telescopic tube. The grass trimmer has now been converted into an edge cutter suitable for vertical cutting (Figure 12). Each time you activate the semiautomatic line extension system, the line will be extended to ensure that you can cut your lawn with the perfect cutting width at all times. Please note that the wear on the line will be increased if you activate the semi-automatic line extension system frequently. Note If the line is too long when you use the machine for the first time, the surplus end of it will be cut by the blade on the safety hood. [. . . ] When you start the machine again the line will be cut to the perfect length automatically. Switch off and unplug the grass trimmer before putting it away or cleaning it. Clean the plastic body and plastic parts with a mild household detergent and a damp cloth. The machine will not work: Check that the power cable is connected properly and check the mains fuses. [. . . ]