User manual EINHELL ERT 250-1

[. . . ] The guard is vital for your safety and for the safety of others, and it is also essential for the grass trimmer to work correctly. Failure to observe this instruction will not only create a potential hazard, it will also result in the loss of your rights under the warranty. Please read the directions for use carefully and observe the information provided. It is important to consult these instructions in order to acquaint yourself with the grass trimmer, its proper use and safety precautions. [. . . ] Item 3: Do not use the tool in the rain, in damp conditions or on wet grass. Item 5: Pull out the mains plug before checking a damaged power cable!Voltage: Power rating: Cutting width: Revolutions n0: Nylon cutting line: Sound pressure level LPA: Sound power level LWA: Vibration aw 230 V ~ 50 Hz 250 W 200 mm 13000 min-1 Ø 1. In this case, noise protection measures need to be introduced for the user. Plug the guard hood on the motor head as illustrated (Figure 3), twist counter-clockwise as far as the stop (bayonet lock) and fasten with the supplied screw (C) (Figure 4). IMPORTANT (figure 3): When you twist the guard hood, make sure that it sits squarely on the grass trimmer housing and that the stud (A) on the guard lies to the right of the stud (B) on the housing. Your grass trimmer will work at its best if you observe the following instructions: Never use the grass trimmer without its safety devices. Do not move the grass trimmer against the grass until the switch is pressed, i. For the correct cutting action, swing the grass trimmer to the side as you walk forward, holding it at an angle of approx. Make several passes to cut long grass shorter step by step from the top (see Figure 12). Keep the grass trimmer away from hard objects in order to avoid unnecessary line wear. The trimmer is designed for cutting lawns and small areas of grass in private and hobby gardens. Tools for private and hobby gardens are not suitable for use in public facilities, parks and sport centers, along roadways, on farms or in the forestry sector. For the tool to be used properly it is imperative to follow the instructions set out in the manufacturers directions for use. It is prohibited to use the tool to chop material for composting because of the potential danger to persons and property. Be sure to disconnect the power plug from the power supply before you replace the line spool!Hold the motor mount (D) tightly and twist the spool mount (E) counter-clockwise until it can be removed (Figure 13). thread the end of the line through the holes in the side of the spool (figure 14). Place the spool mount on the motor mount, hold the motor mount tightly, press down the spool mount and twist it clockwise until it sits securely. Press on the pushbutton and pull out line as far as the edge of the guard hood (Figure 6). The line will be cut to the correct length the first time the cutting head is started (Figure 7). Starting for the first time and operation the grass trimmer is designed only for cutting grass. [. . . ] Please note the following terms under which guarantee claims can be made: 1. These guarantee terms cover additional guarantee rights and do not affect your statutory warranty rights. Please keep your sales receipt in a safe place, as it is your proof of purchase. It would help us if you could describe the nature of the problem in as much detail as possible. [. . . ]