User manual EDOBE XDOM IR LINK PRO

[. . . ] Technical manipulation of the product or any changes to the product are forbidden, due to security and approval issues. Please take care to set up the device correctly - consult your user guide. No guarantee or liability will be accepted for any damage caused due to incorrect use of the equipment supplied, other than indicated in this owner's manual. [. . . ] Installing the ebode IR Link Pro The Hub sockets are colour coded for easy plug & play installation of the IR Receiver and IRED Emitters, which have coloured jacks. Refer to this diagram and the procedure that follows when making connections: Attach the 3IREDB Emitters onto the IR Sensor Windows of the components in your system that you wish to control. Plug the yellow mini plugs of the 3IREDB into one of the yellow labelled "EMITTERS" jacks of the IRHUB2 Connecting Block. Plug the IRQC cable into one of the yellow labelled "EMITTERS" jacks of the IRHUB2, and the other side into the 3. Locate the IRLPRO IR Receiver in a location outside of the equipment cabinet or closet that will have a straight line-of-sight view of your Hand Held Remote(s). The Receiver can be fixed to the surface by using the double side tape pad or via a slide on screw hole on the bottom of the unit. NOTE: It is important that you use an unswitched AC outlet so that the IR system is always active for system power ON commands. STATUS You can send a Power Status signal to the IRLPRO IR Receiver by connecting a power adapter to this connection (not supplied; 5 - 12VDC), which e. When the A/V device or contact is switched on, the Amber Status LED will light up in the IRLPRO IR Receiver so that you can see that the A/V device is switched on. Operation The IR repeater system should now operate each of the controlled components. When the system is operating correctly, you should see a Blue "talk-back" LED flash on the front of the IRLPRO IR Receiver when you aim your hand held remote control(s) at it and press the buttons. How to avoid and solve possible problems Although the ebode IR Link Pro is equipped with proprietary eIR2xTM (pronounced Irex) Technology, which guarantees a high level of immunity of InfraRed noise from direct sunlight, CFL lighting and Flat Panel TV's (including Plasma, LCD and LED), in rare cases, the IRLP IR Receiver may have to be moved to a different location if the unit is picking up unexpected interference. This interference may, in severe cases, prevent the system from working. After repositioning, check to see if the IR Link Pro operates the satellite Receiver or other components. [. . . ] Consumers are required to comply with this notice for all electronic products bearing the following symbol: Environmental Information for Customers in the European Union European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. [. . . ]