User manual EDIROL S-1608 ARCHITECTS AND ENGINEERS SPECIFICATION

[. . . ] Architects & Engineers Specification S-1608 Digital Snake System The digital audio transmission system (Digital Snake) shall consist of at least two modules. [. . . ] The gain level shall be controllable in 1 dB steps from microphone level to line level. The system shall also offer at least 10 preset memories of different configurations of the input gain and phantom power settings. The audio protocol shall have a 96 kHz sampling rate, deliver 24-bit audio, and have a protocol latency of 375 microseconds from the stage unit to the FOH unit. The Input Module shall allow the user to duplicate or "split" the input sources to several Output Modules using a fast gigabit Ethernet switching hub. The system shall be the S-1608 Digital Snake System. 482 S-1608 / S-0816 Dimensions 401 135 S-1608 / S-0816 with Rack Mount Kit Dimensions 101. 6 465 801 West Orchard Drive, Suite 3 Bellingham, WA 98225 135 WWW. ROLANDSYSTEMSGROUP. COM TOLL FREE: 800. 380. 2580 · FAX: 800. 634. 8202 177 177 Architects & Engineers Specification S-1608 Digital Snake System S-1608 / S-0816 Main Specifications Number of Channels AD and DA Conversion Frequency Response Total Harmonic Distortion + Noise Dynamic Range Cross Talk Nominal Input Level PAD Input Impedance Nominal Output Level Output Impedance Recommended Load Impedance Residual Noise Level (IHF-A, typ. ) Equivalent Input Noise Level Network Latency Connectors S-1608 : 16 in 8 out S-0816 : 8 in 16 out 24 bit / 96 kHz (auto-switchable to 44. 1kHz & 48kHz) -2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz) 0. 05 % or less (Pad: On, Input Gain: +4 dBu, 22Hz to 20 kHz) 110 dB -80 dB or less (Input Gain: +4 dBu, typ. ) -65 to -10 dBu (PAD: Off), -45 to +10 dBu (PAD: On) (1 dB step, Max. +22 dBu 600 ohms 10 k ohms or greater -80 dBu or less S-1608: -128 dB S-0816: -124dB 375 microseconds when using REAC cable only (*1) (AD>REAC>DA Latency: approx 1. 2 ms) S-1608 : Analog Input x 16 (XLR type, balanced, phantom power) Analog Output x 8 (XLR type, balanced) Digital Output connector x 1 (Optical type) REAC Connector x 1 (RJ-45 EtherCon type) Remote Connector x 1 (RS-232C, DB-9 type) S-0816 : Analog Input x 8 (XLR type, balanced, phantom power) Analog Output x 16 (XLR type, balanced) Digital Output connector x 1 (Optical type) REAC Connector x 1 (RJ-45 EtherCon type) Remote Connector x 1 (RS-232C, DB-9 type) POWER Indicator x 1, REAC Indicator x 1, REMOTE Indicator x 1, MUTE ALL OUTPUTS Indicator x 1 AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz) 45W +48 V / 14 mA (each input, remote controlled) 401 (W) x 135 (D) x 177 (H) mm or 15-13/16 (W) x 5-3/8 (D) x 7 (H) inches 5. 5 kg 12 lbs 3 oz 0 to +40 degrees Celsius +32 to +104 degrees Fahrenheit Power Cord x 1, REAC Connector Cover x 1, Ferrite Cores x 1 Rubber Foot x 4, Rack Mount Kit x 1, Owner's Manual Indicators Power Supply Power Comsumption Phantom Power Dimensions Weight Operation Temperature Accessories *1: When a REAC Splitter S-4000-SP or a switching hub is used in-line with REAC cables, the network latency will increase by the amount of processing delay introduced by the splitting device itself. [. . . ] * 0 dBu = 0. 775 Vrms 801 West Orchard Drive, Suite 3 Bellingham, WA 98225 WWW. ROLANDSYSTEMSGROUP. COM TOLL FREE: 800. 380. 2580 · FAX: 800. 634. 8202 [. . . ]