User manual EDIROL S-0808 BROCHURE

[. . . ] S-0808 8x8 I/O UNIT New Possibilities in Multi-Channel Audio Distribution 8 inputs x 8 outputs Compact, light-weight, rugged External battery powered or embedded power over REAC TRS and Hi-Z inputs Compact and light-weight with support for external battery. The new flexibility in digital audio transfer. The S-0808 has unprecedented mobility enabling further convenience in many applications such as broadcast, event, live stage, audio installation and location sound. Enjoy flexibility in setup using external battery operation or power supplied over REAC. All channels equipped with superb quality preamps. [. . . ] V-Mount (IDX ) and Gold Mount (Anton Bauer) battery systems and mounts are supported using the included adapter plate. Battery-Powered 8x8 Snake 8in S-0808 8out DC BATTERY 8ch 100m 8ch S-4000R 8out S-0808 8in DC BATTERY An 8 input, 8 output simple digital snake system - ideal when AC power is not convenient or available. Unparalleled Flexibility and Expandability. The Digital Snake advantage. Configure for a variety of applications and environments. Connectivity is simple enabling rapid system changes, expansion and flexibility. Simple Mobile Broadcasting System (8in/8out) Event/Concert System with Battery-powered I/O Units (26in/42out) Stage FOH Mixing Console 10in Field Location Broadcast Truck (OB Van) 1~8ch S-0808 S-4000R 1~8ch DC BATTERY 9~16ch S-0808 9~16ch DC BATTERY 100m 100m M-400 or M-380 10out Portable Recorder, etc S-0816 For Recording 16out 8in S-0808 8out 8ch S-4000M 8ch POWER 100m POWER S-0808 8out 8in Simple system setup using a pair of S-0808s. The S-4000M in a Broadcast Truck (OB Van) provides power to the remote location. Control the remote inputs using the S-4000R. Small concert/event configuration using two battery-powered I/O units enable convenience in placing the talent where AC power is not necessarily available. Mix using your choice of V-Mixer. Broadcasting System with Multiple Locations (32in/8out) Live Stage Mixing System (32in/32out) 100m 1~8ch S-0808 1~8ch 9~16ch S-0808 1~8ch 17~24ch S-0808 1~8ch 25~32ch S-0808 1~8ch Shooting Area D Shooting Area C Shooting Area B Shooting Area A Stage Control Room FOH S-4000R 1~8ch S-0808 1~32ch 1~8ch 9~16ch S-0808 9~16ch 17~24ch S-0808 17~24ch 25~32ch S-0808 100m 10out S-4000M POWER 100m M-400 or M-380 POWER Mixing Console POWER S-4000M POWER S-4000H 1~8ch 10in POWER POWER POWER 25~32ch POWER This system allows I/O to be place in 4 separate locations using S-0808s. The signals from the 4 units are merged by the S-4000M as it travels to the S-4000H breakout location. Power to each of the S-0808s is supplied by the embedded power over REAC in the S-4000M. This system enables the placement of S-0808 units around a stage conveniently located by the drum riser, keyboards, background vocals, etc. S-4000M Merge Unit Up to 4 REAC devices can be merged to a single RE AC stream. Power can also be provided to each S-0808 using REAC Embedded Power technology. M-400/M-380 Live Mixing Console The Live Mixing Console which uses the Digital Snake series as I/O units. 48 input/18 bus/8 matrix/56 output mixing capability allows use at a large variety of live events. M-380 S-0808 Specifications Number of Channels AD/DA Conversion Frequency Response Total Harmonic Distortion + Noise Dynamic Range Cross Talk Nominal Input Level PAD Input Impedance Nominal Output Level Output Impedance Recommended Load Impedance Residual Noise Level (IHF-A, typ. ) 8 in 8 out Sample Rate: 96. 0 kHz/48. 0kHz/44. 1kHz Signal Processing: 24 bits -2 dB/+0 dB (@ +4 dBu, 20 Hz to 20 kHz) 0. 04 % or less (Pad: On, Input Gain: +4 dBu, 22 Hz to 20 kHz) 110 dB -80 dB or less (Input Gain: +4 dBu, typ. ) -65 to -10 dBu (PAD: Off), -45 to +10 dBu (PAD: On) (1 dB step, Max. +22 dBu 600 ohms 10 k ohms or greater -80 dBu or less *2: TRS takes priority if XLR and TRS are simultaneously input to INPUT 5-8. Equivalent Input Noise Level (E. I. N. ) -128 dB Network Latency 375 microseconds when using REAC cable only *1 (AD - REAC - DA Latency: about 1. 2 ms) Input x 8 (XLR type, balanced, phantom power, INPUT 1-8) Input x 2 (TRS type, balanced, INPUT 5/6) *2 Input x 2 (TRS type, balanced, with Hi-Z switch, INPUT 7/8) *2, *3 Output x 8 (XLR type, balanced) REAC EMBEDDED POWER x 1 (RJ-45 EtherCon type) REMOTE x 1 (RS-232C, DB-9 type), DC IN x 1 (XLR 4pin type) REAC EMBEDDED POWER or External Battery (DC 12V - 18V) 26W (DC 12V) +48 V/14 mA (each input, remote controlled) 220. 0 (W) x 176. 0 (D) x 156. 6 (H) mm, 8-11/16 (W) x 6-15/16 (D) x 6-3/16 (H) inches 2. 9 kg, 6 lbs 7 oz Battery Plate Holder and Fastening Screws (8 pcs), REAC Connector Covers x 1 Ferrite Core x 2, Fastening Screw x 4, Owner's Manual (0 dBu = 0. 775 Vrms) Connectors Power Supply Power Consumption Phantom Power Dimensions Weight Accessories *1: XLR connector 1: GND, 2: HOT, 3: COLD *3: TRS of INPUT 7/8 turns to unbalanced when Hi-Z is turn on. * When a REAC Splitter S-4000-SP or a switching hub is used in-line with REAC cables, the network latency will increase by the amount of processing delay introduced by the splitting device itself. The actual delay is dependant upon the specifications of the splitting device, though the maximum delay amount for a single splitting device should be about 200 microseconds. S-0808 Dimensions 11 Options Unit = mm 156. 6 35 110. 6 204 220 40Ch I/O Modular Rack 8in/32out FOH Unit REAC Cable (20 meters) REAC Cable (100 meters) with Reel REAC Optical Converter S-4000S-0832 S-4000H Nex t generation digital a u d i o t r a n s f e r s y s te m Digital Snake. This modular rack can be customized with a choice of high quality I/O cards. Bundled cable protector. SC-W20F 20 meter premium RE AC cable. W100S-R Reel-mounted 100 meter cable. S-OPT Converter for transmitting REAC through optical cable. Uses Neutrik® OpticalCON connectors. 176 Digital Snakes Personal Mixers Superb Quality, Simple Setup, Flexibility. The next generation audio transfer technology ­ REAC. REAC (Roland Ethernet Audio Communication) is Roland's original technology. [. . . ] They provide different categories of certification: ISO9001 Series certification is a product quality certification for products that undergo a certain level of quality control from the design stage to the after service stage; ISO14001 Series certification is for environment-related standards. Each member of the Roland Group is striving to obtain certification. ) Copyright 2009 Roland Corporation. All specification and appearances are subject to change without notice. www. rolandsystemsgroup. com/s0808 Nov. [. . . ]